Class A Driving Test | Oregon 2025 #2 Page 4 of 7
Train for FREE online with our Oregon class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OR CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
22 . When checking tires, finding which of the following is not a cause for concern?
When checking your vehicle's tires, you should confirm that air pressure is neither too low nor too high; that there is at least 4/32 of an inch of tread depth in every major groove on the front tires; that there is at least 2/32 of an inch of tread depth in grooves on other tires; and that radial and bias-ply tires are not used together.
23 . When a vehicle is started:
After starting a vehicle's engine, you should see the warning lights and buzzers go out right away. If they remain on, there is something wrong with your vehicle.
24 . Which of the following is not a problem?
When inspecting an exhaust system, you should verify that parts of the system are not loose, broken, or missing. The system's parts must be properly mounted and should not be rubbing against moving parts of the vehicle.
25 . What kind of brakes do most newer heavy-duty trucks use?
Most newer heavy-duty vehicles use dual air brake systems. A dual air brake system has two separate air brake systems which use a single set of brake controls.
26 . After a tire has been changed, the driver should stop after a short distance to:
After a tire has been changed, the driver should stop a short distance later to recheck the tightness of the tire's lug nuts.
27 . Sometimes, when checking the automatic transmission fluid level:
In some vehicles, you may have to leave the engine running to check the automatic transmission fluid level.
28 . To use the controlled braking method, you should:
The method of controlled braking involves applying the brakes as hard as you can without locking the wheels. If you need to make large steering adjustments while using controlled braking, you should remove your foot from the brake pedal, steer, then reapply the brakes.
See the exact questions that will be on the 2025 Oregon DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.