Knowledge Test Class A #1
Class A Driving Test | Alabama 2024 #1
Train for FREE online with our Alabama class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . How many daily hours of sleep does an adult need to maintain alertness?
Being properly rested is essential to the safe operation of a CMV. To maintain alertness, most people need seven to eight hours of sleep per night.
2 . If you are being tailgated while driving a large vehicle, do all of the following, except:
If you find yourself being tailgated by another driver, you should increase your following distance and avoid making quick moves. Increasing your speed may only result in the other driver continuing to tailgate you at a higher speed. Do not turn on your taillights or flash your brake lights at the other driver.
3 . When preparing to enter traffic, you should do all of the following, except:
Assume other drivers will make room for your much larger vehicle.
When crossing or entering traffic, bear in mind the size of your vehicle and the distance it will need to accelerate. Wait for a gap in traffic that is large enough to accommodate your vehicle before you begin to accelerate. Remember that you will need more room to accelerate if your vehicle is heavily loaded. Before crossing a road, be sure that you can get all the way across without interfering with traffic.
4 . If approaching a vehicle with a distracted driver, you should:
If you see a distracted driver, give them plenty of space and maintain a safe following distance.
5 . A stopped bus:
You should always exercise caution when driving near a stopped bus. There could be passengers in the vicinity and the bus may either prevent them from seeing you or you from seeing them.
6 . Poor weight balance:
Makes a vehicle easier to stop.
If the weight of a load is poorly balanced, it can lead to difficult and unsafe handling of a vehicle.
7 . During a static leakage test, the maximum leakage rate for a single vehicle with air brakes is ____ in one minute.
4 psi
When performing a static leakage test on a single vehicle with air brakes, the leakage rate should be no more than 2 psi in a minute. If air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
See the exact questions that will be on the 2024 Alabama DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Alabama | Frequently Asked Questions
To acquire a CDL Tank endorsement in Alabama, you must first possess a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Knowledge test, which covers the proper handling and driving of tank vehicles. Studying the Alabama CDL Manual can assist in preparing for this test. After passing, you will receive the Tank endorsement on your CDL.
To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). You must then pass the Tank Vehicle Endorsement Knowledge test, which focuses on the correct handling and driving of tank vehicles. It's important to thoroughly study the Alabama CDL Manual to prepare for this test. Upon passing, you'll receive your CDL Tank endorsement.
While Alabama does not mandate specific training or experience for a CDL Tank endorsement, you must pass the Tank Vehicle Endorsement Knowledge test. This test covers the handling and driving of tank vehicles. Studying the Alabama CDL Manual can help prepare for this test. Practical experience or training could be beneficial, but it is not a legal requirement.
Yes, to obtain a CDL Tank endorsement in Alabama, you need to pass the Tank Vehicle Endorsement Knowledge test. This test is in addition to the general CDL test. It covers specific knowledge related to the safe operation and handling of tank vehicles. Studying the Alabama CDL Manual can help you prepare for this exam.
The written test for the CDL Tank endorsement in Alabama covers several topics related to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and safe handling of liquid cargo. It also includes understanding the high center of gravity in tank vehicles, checking for leaks, and emergency procedures. The Alabama CDL Manual provides detailed information on these subjects.
During the CDL Tank endorsement assessment, skills such as safe driving techniques, proper loading and unloading procedures, handling high center of gravity, and understanding outage requirements are evaluated. Additionally, applicants must demonstrate knowledge of emergency response procedures and understanding of how to inspect tank vehicles for safety issues.
Yes, drivers with a CDL Tank endorsement must follow specific rules. They must not drive a tank vehicle unless it's empty if they lack the endorsement. This also applies to tanks that were previously used to transport hazardous materials unless purged of any residue. Additionally, drivers must comply with all federal and state regulations regarding the transport of hazardous materials.
No, a valid Commercial Driver's License (CDL) with a Tank endorsement is required to transport liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. Driving such vehicles without the proper endorsement is against federal and state law in Alabama.
You can add the CDL Tank endorsement to your current commercial driver's license. It is not necessary to apply for a new license. However, you will need to pass the Tank Vehicle test, and there may be additional fees involved. Always check with your local DMV for specific requirements and procedures.
Yes, handling hazardous materials requires a Hazardous Materials (HazMat) endorsement in addition to the CDL Tank endorsement. To obtain a HazMat endorsement, you must pass a written test and a Transportation Security Administration background check. It's essential to understand and comply with these regulations for safety and legal reasons.
