Knowledge Test Class A #1
Class A Driving Test | Utah 2026 #1
Train for FREE online with our Utah class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . The tire load:
Tire load is the maximum weight a tire can safely carry at a given pressure. This rating is stated on the side of each tire.
2 . Convex mirrors:
Are illegal in most states.
Convex mirrors are curved to provide drivers with wider views of the road than can be provided by flat mirrors. However, convex mirrors also make objects appear to be smaller and farther away than they really are.
3 . While driving downhill, you should brake until you reach a speed that is ____ below your safe speed, then release the brake pedal.
20 mph
While driving downhill, you should hold down the brake pedal until your vehicle reaches a speed 5 mph below your safe speed, then release the brake pedal. Repeat this process.
4 . If equipped, a header board should:
Light up when the engine is started.
When checking a header board during the vehicle inspection test, you should ensure that it is secure, free of damage, and strong enough to contain cargo.
5 . A broken exhaust system:
Helps the vehicle run better.
A broken exhaust system is extremely hazardous because it can permit poisonous fumes to enter the vehicle's cab or sleeper berth.
6 . Which of the following is not an example of a driving hazard?
An ice cream truck
