Knowledge Test Class A #1
Class A Driving Test | Montana 2025 #1
Train for FREE online with our Montana class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . Cargo inside a trailer:
Should be loaded with the heaviest items on top of lighter items.
Cargo needs to be secured appropriately to prevent it from moving in transit. Cargo should be arranged to keep the vehicle's center of gravity low and well-distributed.
2 . The drive shaft should:
Not be bent.
During the vehicle inspection test, you should check that the drive shaft is not bent or cracked.
3 . If an applicant falsifies information while applying for a license:
If you are found to have falsified any information on your CDL application, your license will be canceled and you will not be allowed to reapply for a CDL for 60 days.
4 . If unable to tell if the road is becoming icy and slippery, a driver:
If you think the road surface may be becoming icy but you are not certain, you can open your window and feel the front of the side mirror, mirror support, or antenna. If ice has formed on any of these items, the road is likely becoming icy as well.
5 . When asked to complete a driver's side parallel parking maneuver, you should:
Back into the parking space without passing it first.
You may be asked to complete a parallel parking maneuver into a parking space that is to the left of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.
6 . A low air pressure warning signal should activate:
When tank pressure falls below 5 psi.
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
7 . If driving so slowly that you could impede other drivers, you should:
If you must drive so slowly that you will impede the flow of traffic, you should turn on your four-way flashers to alert drivers behind you (as long as local laws allow the use of flashers).
Search the best driving school in your neighbourhood
2025 Montana | Frequently Asked Questions
A CDL Class A license in Montana is defined as a commercial driver's license permitting the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the GVWR of the vehicle(s) being towed is over 10,000 pounds. It covers vehicles like tractor-trailers, truck and trailer combinations.
A Class A CDL license in Montana allows you to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, and livestock carriers. It covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle(s) is over 10,000 pounds.
To obtain a Class A CDL license in Montana, you must be at least 18 years old (21 for interstate driving), possess a valid Montana driver's license, pass a vision test, and successfully complete both a written knowledge test and a skills test which includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving exam.
In Montana, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving (within Montana only). However, to drive interstate (across state lines) or carry hazardous materials, you must be at least 21 years old.
Endorsements are not required for a Class A CDL license, but they provide additional driving privileges. For instance, you may need a Hazardous Materials (H) endorsement to haul hazardous freight, a Tank (N) endorsement to drive tank vehicles, or a Passenger (P) endorsement to transport passengers. Each endorsement requires passing a specific knowledge test.
The Class A CDL skills test in Montana includes three sections: a pre-trip vehicle inspection to ensure the vehicle is safe to drive, a basic vehicle control test to verify your ability to control the vehicle, and an on-road driving exam to assess your ability to drive the vehicle in various road and traffic conditions.
Yes, there are limitations imposed on Class A CDL license holders. Some limitations or restrictions may include: not being permitted to operate a manual transmission if you passed your test in an automatic vehicle, not being allowed to drive a school bus without the proper endorsement, or being required to wear corrective lenses while driving if it's indicated on the license.
In Montana, the written Class A CDL test is primarily administered in English. This is in line with Federal regulations requiring all commercial drivers to read and speak English sufficiently to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, in Montana, accommodations can be made for the Class A CDL written test if you have a disability. You'll need to provide documentation of your disability and specify the type of accommodation needed. It's recommended to contact the Montana Motor Vehicle Division beforehand to ensure all necessary arrangements are made.
Yes, if you don't pass the Class A CDL written test in Montana, you can retake it. However, you must wait at least one day before attempting the test again. Keep in mind that each retest may involve additional fees. It's recommended to review and study the areas you struggled with before retaking the test.
