Knowledge Test Class A #2
Class A Driving Test | New York 2025 #2
Train for FREE online with our New York class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NY CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . If a vehicle has a vehicle inspection report, the driver:
Should not conduct a pre-trip inspection and rely only on the report.
For the first step of a vehicle inspection, you should review the last inspection report on your vehicle, if there is one. The carrier should have repaired any problems noted on the report.
2 . How much sleep does the average person need for every 24-hour period?
Nine to ten hours
To be alert enough to drive safely, the average person needs between seven and eight hours of sleep for every 24-hour period.
3 . When traveling down a steep downgrade, the best way to use your brakes is to:
Apply consistent pressure to the brake pedal all the way down the hill.
On a long or steep downgrade, brakes should only be used to supplement the braking effect of the engine. Apply the brakes just enough to feel a definite slowing down, then release them once you are about 5 mph below your target "safe" speed. Once your vehicle reaches its safe speed again, repeat this process.
4 . If coolant has to be added to a system without a recovery tank, you should:
Wait for the engine to cool before adding coolant.
Before adding coolant to a system without a recovery or overflow tank, you must turn the engine off and wait until it cools. Use gloves or a thick cloth to protect your hands. To release the pressure seal, turn the radiator cap slowly to the first stop.
5 . When driving, the steering wheel should be:
Held with both hands at the top of the wheel.
Hold the steering wheel firmly with both hands, placing them on opposite sides of the wheel.
6 . Driving too fast:
Is acceptable in light traffic.
Driving at excessive speeds is a major cause of fatal crashes. Never drive above the posted maximum speed limit and adjust your speed to fit conditions.
7 . When traveling with cargo, you must make sure the cargo is secure:
Only after coming to a hard stop.
Cargo should be inspected before beginning a trip, within the first 50 miles of the trip, and every three hours or 150 miles traveled. The driver of a truck transporting cargo is responsible for the cargo being safely secured throughout the trip.
Search the best driving school in your neighbourhood
2025 New York | Frequently Asked Questions
In New York, to acquire a CDL Tank endorsement, you must first have a Commercial Driver's License (CDL). Afterward, study the tank endorsement section of the NY CDL manual. Then, schedule and pass the tank endorsement written test at a DMV office. The test typically covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules.
To obtain a CDL Tank license, the essential steps are: possessing a valid Commercial Driver's License (CDL), studying the tank endorsement section of your state's CDL manual, and passing the tank endorsement written test at your local DMV office. This test usually covers topics such as inspecting and driving tank vehicles, and following safe driving rules.
While specific training or prior experience isn't mandatory for a CDL Tank endorsement, it's highly recommended. Understanding the handling characteristics of tank vehicles and knowing how to inspect them is crucial. Studying the tank endorsement section of your state's CDL manual and possibly taking a training course can greatly improve your chances of passing the endorsement test.
Yes, to obtain a CDL Tank endorsement, you must pass the Tank Vehicle (N) endorsement knowledge test. This written exam tests your knowledge on safety rules and regulations related to tank vehicles. It's recommended to study the Tank Vehicle section of the CDL manual to prepare for this test.
The written test for the CDL Tank endorsement includes subjects such as hazardous materials regulations, safe driving practices, tank vehicle inspection, and proper loading and unloading procedures. It also covers topics like emergency response, tanker truck rollover prevention, and the use of baffles and surge suppressors.
The CDL Tank endorsement assessment primarily focuses on the driver's understanding and ability to handle liquid cargo. It evaluates the driver's knowledge of high center of gravity, surge, baffles, outage, inspecting tank vehicles, and safe driving rules. It doesn't typically involve specific maneuvers but will assess your overall control and safety practices when operating a tank vehicle.
Drivers with a CDL Tank endorsement must adhere to specific regulations. They cannot operate a tank vehicle with a capacity of 1,000 gallons or more if they are under 21 years old. Also, they must pass a specific written test to obtain the endorsement. Additionally, they are subject to random drug and alcohol testing and must maintain a clean driving record.
No, a driver cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required for operating a commercial vehicle that is designed to transport any liquid or gaseous materials within a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
The CDL Tank endorsement can be added to your current CDL. You don't need to apply for a new license. However, you will have to pass the Tank Vehicle written test. After passing the test, the endorsement will be added to your CDL, allowing you to legally operate tank vehicles.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional regulations. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Also, these drivers must follow specific safety procedures for loading, unloading, and transporting hazardous materials to prevent accidents or spills.
