Bus #2
Bus Driver Testing | New York 2025 #2
Train for FREE online with our NY bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in New York in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
1 . Hazardous materials must be marked with all of the following, except:
The phone number of a contact person.
Hazardous materials must be marked with the name of the material, the identification number, and the appropriate hazard label. Do not transport a hazardous material unless you are positive that it is permitted.
2 . An outside convex mirror is properly adjusted if:
The driver can see the front windshield.
The outside right and left side convex mirrors on a school bus should be positioned so that the driver can see the fronts of the rear tires touching the ground; each side of the bus up to the mirror mounts; and at least one traffic lane on either side of the bus.
3 . Before driving, access panels should be:
Closed.
You should always inspect the outside of your bus before driving. During this inspection, make sure to close all emergency exits and access panels.
4 . How can you tell if a bus is traveling around a banked curve at too high a speed?
An alarm will go off on the bus's dashboard.
If a bus is leaning toward the outside of a banked curve, it is being driven around the curve at too high a speed. Drivers should reduce their speeds when approaching curves, especially when operating large vehicles, such as buses.
5 . A driver needs a passenger endorsement if operating a vehicle designed to carry:
40 passengers or more.
You must have a CDL with a passenger endorsement to operate a vehicle that is designed to carry 15 or more adult passengers.
6 . A curve's posted design speed is:
Not always safe for buses.
Even under ideal weather conditions, a bus being driven at the posted design speed for a curve could either roll over or slide off the road. For safety, you should reduce your speed before driving a bus around a curve.
7 . Baggage and freight should be stored in a way that:
Allows the cargo to be easily offloaded in an emergency.
On a bus, all baggage and freight should be stored in a manner that allows the driver to move freely and easily; allows riders to exit by any window or door in an emergency; and protects riders from injury if items fall or shift.
2025 New York | Frequently Asked Questions
In New York, to acquire a CDL Tank endorsement, you must first have a Commercial Driver's License (CDL). Afterward, study the tank endorsement section of the NY CDL manual. Then, schedule and pass the tank endorsement written test at a DMV office. The test typically covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules.
To obtain a CDL Tank license, the essential steps are: possessing a valid Commercial Driver's License (CDL), studying the tank endorsement section of your state's CDL manual, and passing the tank endorsement written test at your local DMV office. This test usually covers topics such as inspecting and driving tank vehicles, and following safe driving rules.
While specific training or prior experience isn't mandatory for a CDL Tank endorsement, it's highly recommended. Understanding the handling characteristics of tank vehicles and knowing how to inspect them is crucial. Studying the tank endorsement section of your state's CDL manual and possibly taking a training course can greatly improve your chances of passing the endorsement test.
Yes, to obtain a CDL Tank endorsement, you must pass the Tank Vehicle (N) endorsement knowledge test. This written exam tests your knowledge on safety rules and regulations related to tank vehicles. It's recommended to study the Tank Vehicle section of the CDL manual to prepare for this test.
The written test for the CDL Tank endorsement includes subjects such as hazardous materials regulations, safe driving practices, tank vehicle inspection, and proper loading and unloading procedures. It also covers topics like emergency response, tanker truck rollover prevention, and the use of baffles and surge suppressors.
The CDL Tank endorsement assessment primarily focuses on the driver's understanding and ability to handle liquid cargo. It evaluates the driver's knowledge of high center of gravity, surge, baffles, outage, inspecting tank vehicles, and safe driving rules. It doesn't typically involve specific maneuvers but will assess your overall control and safety practices when operating a tank vehicle.
Drivers with a CDL Tank endorsement must adhere to specific regulations. They cannot operate a tank vehicle with a capacity of 1,000 gallons or more if they are under 21 years old. Also, they must pass a specific written test to obtain the endorsement. Additionally, they are subject to random drug and alcohol testing and must maintain a clean driving record.
No, a driver cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required for operating a commercial vehicle that is designed to transport any liquid or gaseous materials within a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
The CDL Tank endorsement can be added to your current CDL. You don't need to apply for a new license. However, you will have to pass the Tank Vehicle written test. After passing the test, the endorsement will be added to your CDL, allowing you to legally operate tank vehicles.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional regulations. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Also, these drivers must follow specific safety procedures for loading, unloading, and transporting hazardous materials to prevent accidents or spills.