Knowledge Test Class B #2
Class B Driving Test | New York 2025 #2
Train for FREE online with our New York class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NY CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
1 . What is the number one cause of death and injury in work zones?
Equipment placed in the roadway
Speeding traffic is the main cause of death and injury in work zones. Drive with special caution when traveling near road workers.
2 . When driving, the steering wheel should be:
Held with both hands at the top of the wheel.
Hold the steering wheel firmly with both hands, placing them on opposite sides of the wheel.
3 . If asked to sight-side back your vehicle into an alley, you should first:
Pull past the alley and stop parallel to the outer boundary.
If you are asked to alley dock, you should first pull past the alley and stop your vehicle in a position that is parallel to the outer boundary. From there, you should back your vehicle entirely into the alley parking area. Your vehicle should be parked in a straight position within the boundaries of the parking space.
4 . What can change the height of a vehicle?
Number of windows
The added weight of a heavy load will make a vehicle sit lower than usual. A vehicle will often be taller when carrying a light load than when carrying a heavy load. If your vehicle fits under an overpass while carrying a full load, it is not guaranteed that it will fit under the same overpass if it is empty.
5 . When traveling down a hill:
You will slow to a stop.
When a vehicle is traveling on a downward slope, the force of gravity will cause its speed to increase.
6 . If coolant has to be added to a system without a recovery tank, you should:
Wait for the engine to cool before adding coolant.
Before adding coolant to a system without a recovery or overflow tank, you must turn the engine off and wait until it cools. Use gloves or a thick cloth to protect your hands. To release the pressure seal, turn the radiator cap slowly to the first stop.
7 . If federal inspectors judge your vehicle to be unsafe, they can:
Pull the vehicle out-of-service until it is fixed.
If a federal or state inspector judges a CMV to be unsafe, they may put it out-of-service until it is fixed.
2025 New York | Frequently Asked Questions
In New York, to acquire a CDL Tank endorsement, you must first have a Commercial Driver's License (CDL). Afterward, study the tank endorsement section of the NY CDL manual. Then, schedule and pass the tank endorsement written test at a DMV office. The test typically covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules.
To obtain a CDL Tank license, the essential steps are: possessing a valid Commercial Driver's License (CDL), studying the tank endorsement section of your state's CDL manual, and passing the tank endorsement written test at your local DMV office. This test usually covers topics such as inspecting and driving tank vehicles, and following safe driving rules.
While specific training or prior experience isn't mandatory for a CDL Tank endorsement, it's highly recommended. Understanding the handling characteristics of tank vehicles and knowing how to inspect them is crucial. Studying the tank endorsement section of your state's CDL manual and possibly taking a training course can greatly improve your chances of passing the endorsement test.
Yes, to obtain a CDL Tank endorsement, you must pass the Tank Vehicle (N) endorsement knowledge test. This written exam tests your knowledge on safety rules and regulations related to tank vehicles. It's recommended to study the Tank Vehicle section of the CDL manual to prepare for this test.
The written test for the CDL Tank endorsement includes subjects such as hazardous materials regulations, safe driving practices, tank vehicle inspection, and proper loading and unloading procedures. It also covers topics like emergency response, tanker truck rollover prevention, and the use of baffles and surge suppressors.
The CDL Tank endorsement assessment primarily focuses on the driver's understanding and ability to handle liquid cargo. It evaluates the driver's knowledge of high center of gravity, surge, baffles, outage, inspecting tank vehicles, and safe driving rules. It doesn't typically involve specific maneuvers but will assess your overall control and safety practices when operating a tank vehicle.
Drivers with a CDL Tank endorsement must adhere to specific regulations. They cannot operate a tank vehicle with a capacity of 1,000 gallons or more if they are under 21 years old. Also, they must pass a specific written test to obtain the endorsement. Additionally, they are subject to random drug and alcohol testing and must maintain a clean driving record.
No, a driver cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required for operating a commercial vehicle that is designed to transport any liquid or gaseous materials within a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
The CDL Tank endorsement can be added to your current CDL. You don't need to apply for a new license. However, you will have to pass the Tank Vehicle written test. After passing the test, the endorsement will be added to your CDL, allowing you to legally operate tank vehicles.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional regulations. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Also, these drivers must follow specific safety procedures for loading, unloading, and transporting hazardous materials to prevent accidents or spills.