Combination #2
Combination Vehicles Practice Test | New York 2025 #2
Train for FREE online with our New York CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NY combination license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
1 . To prevent a rollover, a driver should:
Turn quickly.
Rollovers can happen when a combination vehicle is turned too quickly. To help prevent the risk of rollover, it is important to keep the vehicle's center of gravity low by loading cargo as close to the ground as possible.
2 . After finishing a pre-trip inspection, you should:
Leave the rear shut-off valves open.
Before a trip, you should ensure that air reaches all air brakes on all trailers by opening up the rear emergency line and service line shut-off valves to listen for escaping air. Close both shut-off valves before beginning to drive.
3 . To test the trailer service brakes, you should:
Move the vehicle forward slowly and apply the brakes with the hand control.
To test the trailer service brakes, you should first ensure that the braking system has a normal air pressure level, then release the parking brake. You should then move the vehicle forward slowly and apply the brakes with the hand control. If the trailer service brakes are working properly, you will feel the brakes activate.
4 . One way to prevent a rollover is to:
Keep cargo as far from the ground as possible.
A rollover is more likely if cargo is unevenly loaded in a rig. To help prevent a dangerous rollover, it is important to keep a load as centered on the rig as possible.
5 . Rollovers happen when drivers:
Drive illegally.
A rollover happens as a result of a driver taking a turn at too high a speed. Be sure to take turns and curves safely and slowly.
6 . To help prevent rollovers, you should:
Keep the load on one side of the trailer.
To lower the risk of a rollover, load your cargo as closely to the ground as possible. To further reduce this risk, take curves and corners slowly.
7 . Starting in which year were newly manufactured trailers required to have ABS?
2004
All trailers and converter dollies manufactured on or after March 1, 1998 must be equipped with Anti-Lock Braking Systems (ABS).
See the exact questions that will be on the 2025 New York DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 New York | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in New York, you must already possess a CDL license. You'll need to pass the Doubles and Triples Endorsement Knowledge Test which covers topics like coupling and uncoupling, inspecting doubles and triples, and more. Once you pass, the endorsement will be added to your CDL license.
To obtain a CDL Doubles/Triples endorsement, you must already have a CDL license. You'll need to study for and pass the Doubles and Triples Endorsement Knowledge Test. This test covers topics such as coupling and uncoupling, inspecting doubles and triples, among others. After passing, the endorsement is added to your CDL license.
While you don't necessarily need specialized experience or training for a CDL Doubles/Triples endorsement, it's beneficial to understand the unique challenges of driving these vehicles. Studying the CDL manual and practicing with these types of vehicles can be helpful. However, the primary requirement is passing the Doubles/Triples Endorsement Knowledge Test.
Yes, to obtain a CDL Doubles/Triples endorsement in New York, you need to pass the Doubles and Triples Endorsement Test. This written exam covers topics like coupling and uncoupling, inspecting doubles and triples, and handling these types of vehicles. It's an additional test beyond the general CDL exam.
The CDL Doubles/Triples endorsement test is a written exam and does not require demonstrating specific driving maneuvers. The test focuses on knowledge regarding coupling and uncoupling, inspecting doubles and triples, and the challenges of driving these vehicles. However, practical skills in handling these vehicles are beneficial for real-world application.
No, it's not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement. This endorsement is a legal requirement for drivers who wish to operate these types of vehicles. Driving without the proper endorsement could result in fines, penalties, or suspension of your commercial driver's license.
You can append the CDL Doubles/Triples endorsement to your current license. You don't need to initiate a new application for a CDL. However, you will need to pass the Doubles/Triples endorsement test and pay any associated fees to add this endorsement to your existing CDL.
Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. These drivers are only permitted to operate double or triple trailers. Moreover, they must comply with specific safety regulations and weight restrictions for these vehicles. Additionally, their driving is subject to regular inspections to ensure compliance with these regulations.
In New York, the maximum legal weight for a vehicle is 80,000 pounds. The maximum length for a two-trailer combination is 58 feet, and for a three-trailer combination is 65 feet. However, these limits can be influenced by factors like the kingpin to rear axle length, and specific routes or roads. Always check with local regulations.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include maintaining a safe following distance, understanding high and low speed instability, checking trailer height before driving, understanding how to couple and uncouple correctly, and inspecting the coupling system regularly. Also, they must comply with the Federal Motor Carrier Safety Administration's regulations.
