Knowledge Test Class A #1
Class A Driving Test | Minnesota 2024 #1 Page 4 of 7
Train for FREE online with our Minnesota class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MN CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
22 . During the vehicle inspection test, you must be able to do all of the following, except:
During the pre-trip vehicle inspection test, you will be asked to indicate where the dipstick is located. You will need to show that the oil level is within a safe operating range and above the refill mark.
23 . You may press more than one button to make a call from a cell phone while driving.
While driving, making a call on a hand-held phone or pressing more than one button to make a call on a hands-free phone are both prohibited activities.
24 . When should a turn signal be canceled by a driver?
If your vehicle does not have self-canceling turn signals, be sure to cancel your turn signal after completing a turn.
25 . If exiting a bus, a driver must:
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.
26 . When changing lanes, turn signals:
Always signal your intentions before turning or changing lanes. Do not assume that other drivers will move out of your way simply because you are signaling to turn.
27 . Failing to exit your vehicle properly during an exercise in the basic vehicle control skills test will result in:
An extra point against your score.
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
28 . A CMV driver traveling fewer than 100 miles is not required to carry safety equipment, such as a fire extinguisher, on their vehicle.
Regardless of distance being traveled, CMVs must always be carrying the proper emergency equipment, including a fire extinguisher.
See the exact questions that will be on the 2024 Minnesota DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Minnesota | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Minnesota, you must first possess a valid CDL. You then need to study the relevant section in the Minnesota Commercial Driver's Manual and pass the written knowledge test at a DVS exam station. The endorsement will be added to your CDL upon passing the test.
To obtain a CDL Doubles/Triples license, you must first hold a valid Commercial Driver's License (CDL). Then, study the relevant sections in your state's Commercial Driver's Manual. After studying, take and pass the Doubles/Triples endorsement knowledge test at your local DMV. This endorsement will be added to your CDL upon passing.
No specific experience or training is legally required to obtain a CDL Doubles/Triples endorsement. However, you need to have a valid CDL. You must study the relevant sections of your state's Commercial Driver's Manual and pass the written knowledge test. Practical experience or training driving such vehicles can be beneficial but is not mandatory.
Yes, to obtain a CDL Doubles/Triples endorsement, you are required to pass an additional written knowledge test. This test focuses on specific rules and safety regulations for driving double and triple trailers. The specific content of the test can be found in your state's Commercial Driver's Manual.
Actually, there is no specific skills test or road test required for the Doubles/Triples endorsement on your CDL. You only need to pass a written knowledge test. This focuses on understanding the handling and safety rules for double and triple trailers, such as coupling and uncoupling, inspecting doubles and triples, and checking air brakes.
No, it's not permissible. In Minnesota, like in all states, you must have a valid Commercial Driver's License (CDL) with a Doubles/Triples endorsement to legally operate double or triple trailers. Operating these vehicles without the proper endorsement can result in serious penalties, including fines and suspension of your driving privileges.
You can add the Doubles/Triples endorsement to your current commercial driver's license (CDL). You don't need to initiate a new application for a CDL. However, you will need to pass the Doubles/Triples written knowledge test and pay the required fees to add this endorsement to your existing CDL.
Yes, there are limitations. While a CDL Doubles/Triples endorsement allows you to drive vehicles with more than one trailer, it doesn't permit you to drive all types of commercial vehicles. For instance, if you want to drive a school bus or a tanker truck, you would need additional endorsements. Also, federal regulations limit the overall length of these vehicles.
In Minnesota, the maximum weight limit for double/triple trailers is 80,000 pounds. The maximum length for a double trailer is 81 feet 6 inches. For a triple trailer, the length should not exceed 100 feet. These limits can vary based on road and bridge laws, so always check local regulations.
Yes, there are specific safety guidelines. Drivers with a CDL Doubles/Triples endorsement must follow regulations regarding securement of cargo, regular vehicle inspections, and maintaining safe following distances. They must also be trained in coupling and uncoupling of units and be aware of the high rollover risk associated with these types of vehicles due to their length and weight.
