Tank #1
Tank Endorsement Test | Minnesota 2025 #1
Train for FREE with our Minnesota tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MN tank license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.
20
16
20
1 . What is a way to warn drivers behind you that you will be slowing down?
Turn all lights on and off several times.
To alert drivers behind you that you plan to slow down, tap your brake pedal lightly a few times to make the brake lights flash.
2 . When backing:
No mirrors should be used.
When backing, you should check mirrors on both sides of the vehicle. In addition to using your mirrors, you should use the assistance of a helper whenever possible.
3 . Once a vehicle is started, coolant temperature should steadily and quickly decrease.
After a vehicle is started, the coolant temperature should gradually begin to rise to a normal operating range.
4 . During a pre-trip inspection, what is the best method for checking your lights?
Driving in traffic and waiting for other drivers to let you know your lights are out
During a pre-trip inspection, you should activate your lights, then get out of the vehicle to look at them.
5 . If a shipping paper describes both hazardous and non-hazardous materials:
If a shipping paper lists both hazardous and non-hazardous materials, the hazardous materials must be entered first.
6 . Carrying gases or liquids in a leaking tank is:
Acceptable if using rural roads.
Before driving, be sure to check the tank's body for dents or cracks. You should also check around and under the vehicle for signs of leaks. It is a crime to carry gases or liquids in a leaking tank.
7 . Vehicles may not be inspected by federal inspectors.
Federal and state officials may inspect commercial vehicles. If an inspector deems a vehicle to be unsafe, it will be put out-of-service until the defects have been fixed.
2025 Minnesota | Frequently Asked Questions
To acquire a CDL Tank endorsement in Minnesota, you must first possess a valid Commercial Driver's License (CDL). Then, study the Minnesota CDL handbook's tank vehicle section. Afterward, schedule and pass a Tank Vehicle written test at your local Department of Motor Vehicles (DMV). Successful completion of the test will add the endorsement to your CDL.
Obtaining a CDL Tank license requires a valid Commercial Driver's License (CDL). You must study the tank vehicle section of the CDL handbook thoroughly. After understanding the material, schedule and pass a Tank Vehicle written test at your local DMV. Once you pass the test, the tank endorsement will be added to your CDL.
While specific training or experience isn't mandatory for a CDL Tank endorsement, it's highly beneficial. Understanding the material in the tank vehicle section of the CDL handbook is crucial. Passing the Tank Vehicle written test at your local DMV is required. Practical experience or training can help you better understand the rules and operations, increasing your chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Minnesota, applicants must pass a specific written knowledge test. This test focuses on the safe transportation of liquid and gaseous materials. It's administered by the Minnesota Department of Public Safety and is in addition to the general CDL requirements.
The written test for a CDL Tank endorsement covers a variety of topics, including the inspection of tank vehicles, correct loading and unloading procedures, driving stability and handling, and the correct response to emergencies or hazardous conditions. It's key to study these areas thoroughly to pass the test and obtain your endorsement.
The CDL Tank endorsement assessment doesn't typically involve a skills or driving test. It focuses on the written exam which tests knowledge on specific topics like inspecting tank vehicles, understanding weight distribution, handling high center of gravity, and dealing with surge. However, general CDL testing will assess your ability to safely operate and maneuver the vehicle.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. For example, they are only allowed to operate vehicles that carry liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. They must also adhere to strict safety and operational regulations.
No, liquid or gas materials cannot be transported without a valid CDL Tank endorsement. If a driver is caught transporting these materials without the proper endorsement, they could face serious penalties such as fines, suspension of their CDL, or even jail time. This endorsement is crucial for safety and regulatory compliance.
To add the CDL Tank endorsement to your current license in Minnesota, you will need to complete a fresh application. You must pass the written knowledge test specific to the Tank endorsement and provide the necessary documentation. Additionally, you may need to pass a skills test depending on the type of tank vehicle you will be operating.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional training and certification, known as a Hazmat endorsement. This ensures drivers are knowledgeable about the risks and safety procedures associated with transporting hazardous materials. Additionally, a federal background check is required to obtain a Hazmat endorsement.