Knowledge Test Class A #2
Class A Driving Test | Washington 2025 #2 Page 3 of 7
Train for FREE online with our Washington class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
15 . Do not base your decision to shift gears on:
One way to know when it is time to shift gears is to learn your vehicle's operating rpm range. You should shift up when your engine reaches the top of that range. You can also learn which speeds each gear is good for and shift up based on your speedometer.
16 . If approaching a railroad crossing that is being approached by a train, you should:
Never attempt to beat a train to a railroad crossing. It is very difficult to accurately judge the speed of an approaching train. If you come upon a crossing that is being approached by a train, you must stop and wait for the train to pass before you attempt to cross the tracks.
17 . While driving:
Texting while driving a CMV is prohibited. "Texting" is defined as manually entering text into, or reading text from, an electronic device.
18 . Poor weight balance:
Poorly balanced cargo can cause a vehicle to be difficult to handle. Keep weight distribution in mind when loading cargo.
19 . What kind of force do emergency brakes use?
Air brakes are really three different braking systems: the service brake, the parking brake, and the emergency brake. Emergency and parking brakes are applied with mechanical force.
20 . A ramp's posted speed limit:
Posted speed limits on exit and entrance ramps often show speeds that are safe to be driven by cars. However, these speed limits may be too fast for large or heavily-loaded vehicles and CMV drivers will likely need to slow down to a speed below the posted limit.
21 . The maximum legal length of a school bus is:
In Washington State, a school bus may be not exceed 40 feet in length.
2025 Washington | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Washington, you must first possess a valid CDL. Then, you should study the Doubles and Triples section of the Washington CDL Handbook. After studying, schedule and pass the written knowledge test at a Washington Department of Licensing office. Lastly, pay the required endorsement fee to add it to your license.
To obtain a CDL Doubles/Triples license, you must first have a basic CDL. You will then need to study for and pass the Doubles/Triples endorsement test, which covers specific knowledge related to driving these types of vehicles. This includes understanding the handling and safety procedures. Finally, you'll pay any required fees for the additional endorsement on your license.
While formal experience isn't required for a CDL Doubles/Triples endorsement, you must possess a valid Commercial Driver's License (CDL). It's recommended to study the CDL manual and take practice tests. Understanding coupling/uncoupling, inspecting doubles/triples, and checking air brakes is essential. Passing the Doubles/Triples endorsement knowledge test is the final step.
Yes, to obtain a CDL Doubles/Triples endorsement, you must pass the Doubles/Triples endorsement knowledge test. This test covers topics like coupling and uncoupling, inspecting doubles and triples, and checking air brakes. There is no additional driving skills test required beyond the standard CDL exam.
The CDL Doubles/Triples endorsement test primarily focuses on knowledge rather than specific driving maneuvers. You'll need to understand coupling and uncoupling, inspecting doubles and triples, and managing the high risk of rollover. Additionally, you'll need to know about pulling double/triple trailers, as well as the implications of crashes. The test is written, not practical, so no driving skills are showcased.
No, it is not permissible. In Washington, like in all states, a valid CDL Doubles/Triples endorsement is required to legally operate double or triple trailers. Driving these vehicles without the necessary endorsement can lead to serious penalties including fines and suspension of your commercial driving license.
You can append the Doubles/Triples endorsement to your existing CDL. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples knowledge test. Once you pass, the endorsement is added to your CDL, allowing you to legally operate double and triple trailers.
Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. They can only operate double or triple trailers. Also, these drivers must comply with all federal and state regulations regarding commercial vehicle operation, including weight limits, logbook rules, and safety inspections. Any violation can lead to penalties or revocation of the endorsement.
In Washington State, double trailers can't exceed a combined length of 61 feet and triple trailers can't exceed 75 feet. As for weight, the maximum gross vehicle weight (including all axles) is 105,500 pounds. However, individual axle weights can't exceed limits set by federal bridge laws. Always check specific state and federal regulations.
Yes, there are specific safety guidelines and regulations for driving double/triple trailers with a CDL Doubles/Triples endorsement in Washington. These include maintaining proper spacing between trailers, using proper turning techniques, and adhering to weight restrictions. It is important to follow these guidelines to ensure the safe operation of double/triple trailers on the road.