Knowledge Test Class A #2
Class A Driving Test | Washington 2025 #2
Train for FREE online with our Washington class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . If you are taking the driving test and the route does not include a railroad crossing, you:
During the on-road driving test, if your route does not include a railroad crossing, the examiner may ask you to explain and demonstrate the necessary procedures at a simulated location.
2 . Too much air pressure in a tire:
Tires should never have too much air pressure. Be sure to check your tires' air pressure with a gauge during inspections.
3 . When transporting a load, the cargo should be inspected:
Cargo and its securing devices must be inspected before starting a trip. After beginning a trip, the driver should check the load and securing devices within the first 50 miles on the road, every three hours or 150 miles traveled, and after every break.
4 . Scan the road ____ ahead of your vehicle.
Good drivers scan the road at least 12 to 15 seconds ahead of their vehicles. Looking ahead will allow you to identify and react to hazards before meeting them. Be sure to specifically look for vehicles that are coming onto the highway, entering into your lane, or turning.
5 . What is the slow vehicle rule?
Washington State's slow vehicle rule states that if you are driving slowly on a two-lane road and there are five or more vehicles backed up behind you, you must pull off of the roadway at the first available safe turnout to let the other drivers pass.
6 . Cargo being transported should be checked:
Cargo should be inspected before beginning a trip, within the first 50 miles of the trip, and every three hours or 150 miles traveled thereafter. Cargo should be inspected every time the driver stops to take a break. The driver of a truck transporting cargo is responsible for the cargo being safely secured throughout the trip.
7 . When loading cargo, it is important to:
It is a driver's responsibility to make sure their vehicle is not overloaded. They must be aware of legal weight limits and the maximum weight that their vehicle is rated to carry, including the weight capacity rating of the suspension system.
2025 Washington | Frequently Asked Questions
To secure a CDL Bus endorsement in Washington, you must first hold a valid CDL. Then, pass the passenger vehicles test and the school bus endorsement test. Also, complete a federal background check and submit a medical examiner's certificate. Lastly, successfully complete a driving skills test in the type of bus you wish to drive.
To obtain a CDL Bus license, you need to have a valid driver's license, pass a physical examination, and complete a CDL training course. Afterwards, you'll need to pass the written knowledge test and the practical skills test. It's also necessary to pass additional tests for any endorsements, such as passenger or school bus operations.
Yes, specific training is necessary for a CDL Bus endorsement. You must pass the Passenger Endorsement and School Bus Endorsement knowledge tests. Additionally, you need to take a driving skills test in the type of vehicle you plan to drive. Training courses are available and often recommended to prepare for these tests and gain practical skills.
CDL Bus licenses fall under three classifications: Class A, B, and C. Class A is for any combination of vehicles with a combined GVWR of 26,001 or more pounds. Class B is for single vehicles weighing 26,001 or more pounds, or any vehicle towing another not over 10,000 pounds. Class C is for vehicles designed to transport 16 or more passengers (including the driver), or hazardous material vehicles.
No, you cannot use your personal vehicle for the CDL Bus driving test. The test must be taken in the same type of vehicle for which you are trying to get a license. Therefore, you need to use a commercial bus for the CDL Bus driving test. This ensures that you can handle and operate a bus safely and effectively.
During the CDL Bus driving test, examiners evaluate your ability to perform pre-trip inspections, basic vehicle control, and on-road driving. This includes skills like backing up, parallel parking, docking in a bay, and making proper turns. They also assess your understanding of traffic rules, ability to handle emergency situations, and how you interact with passengers.
Yes, there are additional medical and physical prerequisites for a CDL Bus endorsement. You need to pass a Department of Transportation (DOT) physical examination every 24 months. The examination evaluates your vision, hearing, blood pressure, and checks for conditions like diabetes or epilepsy that might impair your driving ability.
No, it is not permissible to transport passengers without a valid CDL Bus endorsement. Driving a commercial bus without the appropriate CDL endorsement is illegal and can result in fines, license suspension, or even imprisonment. It's important to have the correct endorsements to ensure safety and compliance with transportation laws.
Yes, the CDL Bus endorsement can be added to your existing CDL. You don't need to apply for a new license, but you will need to pass the Passenger Vehicles written test and the skills test in the type of vehicle you plan to drive. The endorsement is then added to your CDL.
Yes, there are restrictions for drivers with a CDL Bus endorsement. Drivers must not have any serious traffic violations, they must pass a background check, and meet physical and medical standards. Additionally, they are subjected to random drug and alcohol testing. Drivers are also limited to the type and number of passengers their specific endorsement allows.