Knowledge Test Class A #1
Class A Driving Test | Washington 2024 #1 Page 5 of 7
Train for FREE online with our Washington class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
29 . Pre-trip inspections are:
Federal and state laws require drivers to inspect their vehicles before every trip, regardless of length.
30 . What is the maximum legal weight to be placed on a single axle?
The allowable gross weight of a bus or truck depends on its tire size, the number of axles, and the spacing of axles (or axle groups). In Washington State, the weight of a commercial vehicle is limited to no more than 20,000 pounds on any single axle.
31 . What is the slow vehicle rule?
Washington State's slow vehicle rule states that if you are driving slowly on a two-lane road and there are five or more vehicles backed up behind you, you must pull off of the roadway at the first available safe turnout to let the other drivers pass.
32 . Backing with a trailer is dangerous because:
Backing a truck is always dangerous because the driver may not be able to see everything behind them. CMV operators should avoid backing whenever possible.
33 . No more than ____ may be driven by a commercial driver in an eight-day period.
In Washington State, commercial drivers may be on duty for no more than 70 hours in an eight-day period.
34 . A broken exhaust system:
A broken exhaust system can let poisonous fumes into a vehicle's cab or sleeper berth. Be sure to inspect your exhaust system for any loose, broken, or missing parts.
35 . Scan the road ____ ahead of your vehicle.
Good drivers scan the road at least 12 to 15 seconds ahead of their vehicles. Looking ahead will allow you to identify and react to hazards before meeting them. Be sure to specifically look for vehicles that are coming onto the highway, entering into your lane, or turning.
2024 Washington | Frequently Asked Questions
A CDL Class A license in Washington is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, given that the GVWR of the vehicle(s) being towed is in excess of 10,000 pounds.
A Class A Commercial Driver's License (CDL) in Washington allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the GVWR of the vehicle(s) being towed exceeds 10,000 pounds. This includes but is not limited to tractor-trailers, truck and trailer combinations, and tank vehicles.
To obtain a Class A CDL license in Washington, you must be at least 18 years old (21 for interstate driving), possess a valid Washington state driver's license, pass a vision test, and pass knowledge and skills tests. You'll also need to provide proof of U.S. citizenship or lawful permanent residency, and meet medical requirements.
In Washington, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving (within Washington only). However, federal regulations require drivers to be at least 21 years old to drive a commercial vehicle interstate (across state lines) or to haul hazardous materials.
While not always required, specific endorsements may be necessary for a Class A CDL license depending on the type of vehicle you'll operate or cargo you'll carry. These can include endorsements for double/triple trailers, tanker vehicles, passenger vehicles, or hazardous materials. Each endorsement requires additional knowledge tests and sometimes a skills test.
The Class A CDL skills test in Washington encompasses three parts: the pre-trip inspection, basic vehicle controls, and on-road driving. The pre-trip inspection checks your ability to assess your vehicle's safety. Basic vehicle controls assess your ability to maneuver and control the vehicle. The on-road driving test evaluates your driving skills in various traffic situations.
Yes, Class A CDL license holders in Washington may face limitations based on their specific endorsements and restrictions. For instance, without the proper endorsements, they cannot operate vehicles with air brakes, transport passengers, or haul hazardous materials. Additionally, restrictions may be placed on licenses due to medical conditions or lack of skills.
Yes, it is possible to take the written Class A CDL test in languages other than English in Washington. The Department of Licensing offers the test in several languages. However, federal regulations require anyone applying for a commercial driver license (CDL) to understand and read English to ensure safety on the roads.
Yes, you can request accommodations for the Class A CDL written test if you have a disability. Washington's Department of Licensing is committed to providing equal access to its services. If you have special needs, contact your local driver licensing office to discuss your situation and determine what accommodations can be made.
If you don't pass the Class A CDL written test in Washington, you can retake it. However, you must wait at least one day before retaking the test. Keep in mind that there may be additional fees for each attempt. It's advisable to study thoroughly before retaking the test to increase your chances of passing.