Knowledge Test Class A #2
Class A Driving Test | Utah 2024 #2 Page 6 of 7
Train for FREE online with our Utah class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
36 . What must be on an air tank in an air-braked vehicle?
An oxidizer
All air tanks on air-braked vehicles must have one-way check valves located between the air compressor and the first reservoir. This prevents air from flowing out in the event of a leak.
37 . Which of the following is not an example of a driving hazard?
An ice cream truck
Passing an accident scene can be hazardous because the people involved in the accident may not be watching traffic, and the scene itself may distract other passing drivers. Ice cream trucks can create hazardous conditions because they attract children who may not pay attention to nearby vehicles. Shoppers near the roadway are often paying attention to stores, not passing traffic.
38 . When switching gears, what happens if you remain in neutral for too long?
The vehicle will be difficult to stop.
Remaining in neutral for too long when shifting gears may make it difficult to put the vehicle into the next gear.
39 . Dry bulk tanks:
Cannot be driven on interstates.
Dry bulk tanks require special care when being driven because they have high centers of gravity. Drivers should also be careful because the materials being carried can easily shift in transit, causing a change in the vehicle's handling.
40 . When entering fog, you should:
Slow down.
If at all possible, it is best to avoid driving in fog. However, if you must drive through fog, slow down before reaching it.
41 . When passing another vehicle, you should:
Wave to other drivers.
It is always safest to assume that other drivers, bicyclists, and pedestrians don't see you. Be prepared for the possibility that they may suddenly move into your path. It may be safe to lightly tap your horn or flash your lights as you pass.
42 . Laws about securing loads and regulating CMV weights may vary from state to state. During interstate travel:
The driver can choose which state’s laws to follow.
Commercial vehicle weight, securement of cargo, covering of loads, and where large vehicles can be driven are all regulated by federal, state, and local laws. These vary from place to place, so you must be aware of the rules that apply where you will be driving. State laws in the state in which you are driving take precedence.
2024 Utah | Frequently Asked Questions
To acquire a CDL Tank endorsement in Utah, you must first have a valid CDL. Then, you need to pass the Tank Vehicle written test at a Utah Driver License Division office. The test covers knowledge about tank vehicles, their unique properties, and how to safely operate them. Once you pass the test, the endorsement will be added to your CDL.
To obtain a CDL Tank license, you need a valid Commercial Driver's License (CDL). You must then pass the Tank Vehicle written test, which covers knowledge on the safe operation and unique properties of tank vehicles. The test is offered at Utah Driver License Division offices. Once passed, the endorsement is added to your CDL.
While specific training is not mandatory for a CDL Tank endorsement in Utah, it's highly recommended to prepare for the endorsement test. You should understand the safety protocols, inspection procedures, and driving techniques for tank vehicles. Practical experience, although not required, can also be beneficial. Always refer to Utah's CDL manual for comprehensive information.
Yes, to obtain a CDL Tank endorsement in Utah, you are required to pass an additional written test. This test focuses on the safe operation and unique properties of tank vehicles. It is separate from the general CDL test and must be taken at a Utah Driver License Division office.
The written test for a CDL Tank endorsement covers various subjects related to tank vehicles. This includes the inspection and maintenance of tank vehicles, understanding bulk packaging markings, driving stability and handling, safe driving rules, and emergency response procedures. The test is designed to ensure drivers can safely operate tank vehicles.
During the CDL Tank endorsement assessment in Utah, several skills and maneuvers are assessed. These include inspecting the tank vehicle for safety, proper loading and unloading procedures, controlling the vehicle's speed and braking, maneuvering through turns and curves, and maintaining control during emergency situations. Additionally, knowledge of hazardous materials regulations and proper handling procedures is also evaluated.
Yes, drivers with a CDL Tank endorsement must adhere to specific regulations. They must ensure the load is properly balanced and secure, follow all safety procedures when loading and unloading, and handle hazardous materials carefully. Additionally, they must comply with hours-of-service regulations to prevent driver fatigue. Violation of these rules can result in fines, suspension, or revocation of the endorsement.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials. This ensures the driver is knowledgeable and skilled in handling such materials, which can pose unique challenges and risks. Driving without the necessary endorsement is illegal and can result in serious penalties, including fines and suspension of the driver's CDL.
Yes, a CDL Tank endorsement can be added to your current commercial driver's license. You don't need to apply for a new license. However, you will need to pass the tank vehicle written test and pay the required fee. The endorsement allows you to transport liquid or gas materials in a tank vehicle. Always ensure you comply with all regulations.
Yes, to handle hazardous materials in Utah, you must have both a CDL Tank endorsement and a Hazardous Materials (HazMat) endorsement. Getting the HazMat endorsement involves passing a knowledge test, undergoing a TSA background check, and fingerprinting. This ensures that drivers are trained to handle these materials safely and understand the associated risks and precautions.