Tank #1
Tank Endorsement Test | Utah 2024 #1
Train for FREE with our Utah tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT tank license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.
20
16
20
1 . Tread depth in the major grooves on a front tire should be at least:
3/4 of an inch.
Tires need to have at least 4/32 of an inch of tread depth in every major groove on the front tires, and at least 2/32 of an inch of tread depth on other tires.
2 . When backing, using another person to help guide you is not recommended.
When backing, it is always a good idea to use a helper to monitor your blind spots.
3 . What can happen if one-fourth of the leaves in a leaf spring are missing when a vehicle is inspected?
The driver will be asked to decrease the weight of the load.
If at least one-fourth of the leaves in a leaf spring are missing, the vehicle will be put out-of-service until the defect is fixed.
4 . Mismatched tire sizes are acceptable on the rear axles.
When inspecting a vehicle's tires, you should verify that there are no tires of mismatched sizes.
5 . A rear tire with a tread depth of 2/32 of an inch is acceptable.
Tires need to have at least 4/32 of an inch of tread depth in every major groove on the front tires, and at least 2/32 of an inch of tread depth on other tires.
6 . How many daily hours of sleep does an adult need to maintain alertness?
Four to five
Being properly rested is essential to the safe operation of a CMV. To maintain alertness, most people need eight to nine hours of sleep per night.
7 . Tire rims that have welded repairs are acceptable for use.
Wheels or rims that have had welding repairs are not safe to be used.
2024 Utah | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Utah, you first need a valid Commercial Driver's License (CDL). Next, study the Doubles and Triples section of the Utah CDL handbook. Then, schedule and pass the Doubles/Triples knowledge test at a Driver License Division office. After passing the test, you'll receive your endorsement. Remember, driving experience with these types of vehicles is beneficial.
To obtain a CDL Doubles/Triples license, you need a valid Commercial Driver's License (CDL). Study the Doubles and Triples section of your state's CDL handbook. Then, schedule and pass the Doubles/Triples knowledge test at your local driving license office. Upon passing, you will receive your endorsement. It's also recommended to have hands-on experience with these types of vehicles.
While it's not a legal requirement to have specialized experience or training for a CDL Doubles/Triples endorsement, it's highly recommended. This is because driving these types of vehicles requires specific skills. Studying the Doubles/Triples section of the CDL handbook and passing the knowledge test is mandatory, but practical experience can significantly improve safety and confidence.
Yes, to receive a CDL Doubles/Triples endorsement in Utah, you must pass an additional written knowledge test specifically for Doubles/Triples. This test covers the special procedures and safety considerations associated with operating these types of vehicles. It is separate from the general CDL written test. You can prepare by studying the Doubles/Triples section of your state's CDL handbook.
For the CDL Doubles/Triples endorsement, there isn't a specific skills or maneuvers test as there is with the basic CDL. The endorsement only requires a written knowledge test. However, the test will cover topics like coupling and uncoupling, inspecting doubles and triples, and managing the vehicles during different situations. These are skills you'll need to safely operate these vehicles.
No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Utah. The endorsement is required by federal and state law to ensure that drivers have the necessary skills and knowledge to safely operate these types of vehicles. Driving without the appropriate endorsement can result in fines and penalties.
You can append the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you'll need to pass the Doubles/Triples knowledge test. After passing, the endorsement will be added to your existing CDL. Remember, there's no skills test for this endorsement in Utah.
Yes, there are some limitations for drivers with a CDL Doubles/Triples endorsement. For instance, they can only drive vehicles that their base CDL allows. Additionally, all federal and state regulations regarding hours of service, vehicle maintenance, and safety inspections must be followed. Violating these rules can result in penalties or loss of the endorsement.
In Utah, double trailers can be up to 81 feet long and triple trailers up to 105 feet long. The maximum weight for both is 129,000 pounds. However, these limits can vary depending on the specific highways and routes used. Drivers should always check local regulations and restrictions before operating these types of vehicles.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include checking that all couplings are secure, maintaining extra following distance, and taking wider turns to avoid trailer off-tracking. Also, they must be aware of the "crack-the-whip" effect, which can cause a rollover. Federal regulations also apply, such as hours-of-service rules.