Knowledge Test Class A #2
Class A Driving Test | Maine 2026 #2 Page 2 of 7
Train for FREE online with our Maine class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ME CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
8 . When it is difficult to see and you are traveling near other drivers, you should:
Use your low beam headlights when traveling near other drivers at times when it is difficult to see, such as at dawn, at dusk, or in poor weather conditions. Using the high beam setting under certain conditions could make it difficult for other drivers to see.
9 . A low air pressure warning signal should activate:
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
10 . Bridges usually:
Bridges tend to freeze before other parts of the road surface. You should be especially careful on bridges when temperatures are near the freezing point.
11 . Rust around wheel nuts may mean:
Rust around wheel nuts may mean that they are loose. Check the tightness of the nuts if you see any rust in the area.
12 . Bridges usually freeze:
Bridges tend to freeze before other parts of the roadway. Be particularly careful on bridges when temperatures are close to the freezing point.
13 . Regrooved tires:
Regrooved, recapped, or retreaded tires are prohibited on the front wheels of a bus.
14 . Dual tires should:
When inspecting a vehicle, you should verify that your dual tires do not come into contact with one another, or with any other part of the vehicle.
Search the best driving school in your neighbourhood
2026 Maine | Frequently Asked Questions
To acquire a CDL Tank endorsement in Maine, you must already have a Commercial Driver's License (CDL). Next, study the Tank Vehicles section of the Maine CDL Handbook. Then, schedule and pass the Tank Vehicles Knowledge Test at your local Bureau of Motor Vehicles (BMV) branch. Upon passing, you'll receive your endorsement. Training courses are also available to help prepare for the test.
Obtaining a CDL Tank license requires having a Commercial Driver's License (CDL) first. You must study the Tank Vehicles section of your state's CDL handbook, then pass the Tank Vehicles Knowledge Test at your local Bureau of Motor Vehicles. Successful completion of this test will grant you the CDL Tank endorsement. Taking a training course is also beneficial.
While specific training or experience is not mandatory to get a CDL Tank endorsement in Maine, it's highly recommended. Studying the Tank Vehicles section of the Maine CDL Handbook is necessary. Passing the Tank Vehicles Knowledge Test at the local Bureau of Motor Vehicles is also required. Training courses, though not compulsory, can help prepare for this test.
Yes, to obtain a CDL Tank endorsement in Maine, you must pass the Tank Vehicles Knowledge Test. This is an additional written exam that covers specific knowledge related to operating tank vehicles. The information for this test can be found in the Tank Vehicles section of the Maine CDL Handbook.
The written test for a CDL Tank endorsement covers several subjects, including the inspection of tank vehicles, safe driving practices for tank vehicles, and safe loading and unloading procedures. It also includes questions about the handling of emergencies and the properties of different types of liquids and gases you might transport.
The CDL Tank endorsement assessment does not involve a skills or maneuvers test. Rather, it is a written test that examines your knowledge of operating tank vehicles. This includes understanding the vehicle's handling characteristics, the importance of inspecting tank vehicles, and the procedures to follow when loading and unloading cargo.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate tank vehicles, which are specifically designed to transport liquid or gaseous materials within a tank. Additionally, if the tank is not permanently attached to the vehicle, it must have a rated capacity of 1,000 gallons or more.
No, you cannot legally transport liquid or gas materials without a valid CDL Tank endorsement in the United States. This endorsement is required for drivers who wish to operate a tank vehicle, defined as a commercial vehicle designed to transport any liquid or gaseous materials within a tank either permanently or temporarily attached to the vehicle.
You can add a CDL Tank endorsement to your current commercial driver's license. You don't need to apply for a new license. However, you must pass the Tank Vehicle written test. After passing, the endorsement will be added to your existing CDL, enabling you to operate tank vehicles legally.
Yes, handling hazardous materials with a CDL Tank endorsement requires an additional Hazmat endorsement. To obtain this, you must pass a written test about the regulations and safety precautions for handling hazardous materials. Additionally, a TSA background check is required to ensure you're not a security risk.
