Combination #1
Combination Vehicles Practice Test | Maine 2026 #1
Train for FREE online with our Maine CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ME combination license in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
1 . More than half of all accident-related truck driver deaths are caused by:
More than half of all accident-related truck driver deaths are a result of truck rollovers. To help prevent a rollover, be sure to load cargo low to the ground and centered on your rig. Take corners slowly and carefully.
2 . If a trailer begins to skid, it is best for the driver to:
If your trailer begins to skid, you should release the brakes to regain traction. The trailer will begin to straighten out once the wheels begin to grip the road again.
3 . In a vehicle equipped with an automatic tractor protection valve, the valve will pop out when air pressure drops to a level between:
In vehicles equipped with an automatic tractor protection valve, the valve will pop out if air pressure drops to a level between 20 and 45 psi. When the valve pops out, the protection valve will close, stopping the flow of air.
4 . The service air line is often controlled by the foot brake and is attached to the ____ valves.
The service air line carries air and is controlled by either the foot brake or trailer hand brake. The service air line is attached to relay valves, which allow the trailer brakes to be applied quickly.
5 . Having anti-lock brakes on only one axle:
If a vehicle has anti-lock brakes on just one axle, the driver will still have more control during braking than they would without any anti-lock brakes.
6 . If a trailer begins to jackknife, the driver:
If a trailer begins to jackknife, you should release the brakes and allow the trailer wheels to regain traction with the road. Do not apply the trailer hand brake to attempt to straighten out the rig because the application of brakes is what caused the wheels to lock in the first place.
7 . Rollovers happen when:
Rollovers are caused by operators turning too fast. To avoid rolling over, drive slowly on entrance ramps, on exit ramps, and around corners. Avoid making quick lane changes when towing trailers.
See the exact questions that will be on the 2026 Maine DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2026 Maine | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Maine, you must possess a valid Maine CDL. Then, pass the Doubles/Triples Knowledge test. This test covers the information found in the Maine Commercial Driver License Manual's section on Doubles/Triples. After passing the knowledge test, you'll receive your endorsement which allows you to drive vehicles with more than one trailer.
To obtain a CDL Doubles/Triples license, you must first have a Commercial Driver's License (CDL). Next, you need to pass the Doubles/Triples Knowledge Test, which covers handling, inspecting, and driving double/triple trailers. Study materials can be found in the CDL manual. After passing the test, the Doubles/Triples endorsement is added to your CDL.
While specialized experience or training isn't explicitly required for a CDL Doubles/Triples endorsement, it's beneficial to have a good understanding of handling and driving large vehicles. Studying the CDL manual, specifically the section on Doubles/Triples, is crucial. Passing the Doubles/Triples Knowledge Test is mandatory to receive the endorsement.
Yes, to obtain the CDL Doubles/Triples endorsement, you must pass the Doubles/Triples Knowledge Test. This test covers topics such as coupling and uncoupling, inspecting doubles and triples, and handling and driving double and triple trailers. The information required for this test can be found in your state's CDL manual.
The CDL Doubles/Triples endorsement test is a written knowledge test, not a skills test. Therefore, you won't need to showcase any specific maneuvers. However, you should have knowledge about coupling and uncoupling, inspecting doubles and triples, and the proper procedures for handling and driving double and triple trailers.
No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Maine. This endorsement is necessary to ensure that drivers have the knowledge and skills to safely operate these types of vehicles. Operating without the appropriate license or endorsement can result in fines and penalties.
You can add the CDL Doubles/Triples endorsement to your existing commercial driver's license. You don't need to initiate a new application for a different license. However, you will have to pass the Doubles/Triples knowledge test and pay an endorsement fee to add it to your current CDL.
Yes, there are limitations for drivers with a CDL Doubles/Triples endorsement. Drivers must adhere to the maximum allowable weight for double and triple trailers. They also cannot drive these trailers on all roads, as some are restricted. Additionally, drivers must follow all federal and state regulations regarding rest periods and hours of service.
In Maine, the maximum legal weight for a vehicle is 80,000 pounds. However, the exact weight for double/triple trailers can depend on axle spacing. As for length, the maximum limit is 75 feet for doubles and 100 feet for triples. These limits may vary depending on the type of roads or highways used. Always check local regulations before driving.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety regulations. They must ensure proper coupling and uncoupling of trailers, maintain safe following distances, and manage high-speed and curve handling. They're also required to perform routine vehicle inspections, secure cargo appropriately, and adhere to weight restrictions. Additionally, drivers must comply with all federal and state hours-of-service regulations.
