Air Brakes #2
Air Brakes Endorsement Test | Maine 2025 #2
Train for FREE online with our Maine CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ME Class A/Class B driver license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
1 . If an air compressor is belt-driven, the belt should be routinely checked to ensure that it is:
If your vehicle has air brakes, the air compressor drive belt should be checked before each drive. Check the tightness of the belt and verify that it is in good condition.
2 . The parking brake in a newer vehicle is applied by:
In newer vehicles with air brakes, the parking brake is controlled by a yellow, diamond-shaped knob. The driver should pull the knob outward to apply the parking brakes and push the knob inward to release them.
3 . During a static leakage test, what is the maximum leakage rate that is safe for a double combination vehicle?
When performing a static leakage test on a double combination vehicle with air brakes, the leakage rate should be no more than 3 psi in one minute. If the air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
4 . During an inspection, slack adjusters on S-cam brakes should not move more than:
Check each slack adjuster after parking on level ground, setting wheel chocks, and disengaging the parking brake. Pull the slack adjusters to make sure they do not move more than about one inch from where the push rod is attached. If they move more than one inch, they may be out of adjustment and will need to be fixed.
5 . Braking mechanisms are located inside:
Drum brakes are attached to the wheels and located on the axles of a vehicle. The braking mechanisms that cause the vehicle to stop can be found inside of a drum brake.
6 . An application pressure gauge shows:
If a vehicle is equipped, an application pressure gauge shows how much air pressure is being applied to the brakes. This gauge can help a driver identify if their brakes are beginning to fade.
See the exact questions that will be on the 2025 Maine DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 Maine | Frequently Asked Questions
In Maine, a CDL Class B license allows the holder to operate commercial vehicles weighing more than 26,000 pounds or towing a vehicle not exceeding 10,000 pounds. This includes buses, dump trucks, and straight trucks. The license also includes any vehicle included within Class C. However, to drive a combination vehicle, a Class A license is required.
A Class B CDL license in Maine allows the holder to operate single or combination vehicles where the single vehicle weighs over 26,000 pounds. This includes straight trucks, buses, segmented buses, dump trucks with small trailers, and trucks towing trailers not exceeding 10,000 pounds. However, a Class B license does not cover operation of Class A vehicles.
To acquire a Class B CDL license in Maine, you must be at least 18 years old (21 for interstate driving), possess a valid Maine driver's license, pass a vision test, and successfully complete a written knowledge test. Afterward, you'll need to pass a skills test which includes a pre-trip vehicle inspection, basic controls test, and on-road driving exam.
To qualify for a Class B CDL license in Maine, you must be at least 21 years old for interstate driving. However, if you plan to drive only within Maine (intrastate driving), you can apply for a Class B CDL license at the age of 18. Additionally, you must pass both a written knowledge test and a skills test.
While endorsements are not necessary to obtain a basic Class B CDL in Maine, they can broaden the range of vehicles you can operate. Endorsements include passenger (P), school bus (S), tank vehicle (N), and hazardous materials (H). Each endorsement requires passing additional written and/or skills tests.
The Class B CDL skills assessment in Maine includes a pre-trip vehicle inspection to ensure the vehicle is safe to drive, a basic controls test to evaluate your ability to control the vehicle, and an on-road driving test where you'll need to demonstrate proper driving techniques and safety measures.
Yes, Class B CDL license holders in Maine are restricted to operating vehicles under 26,001 pounds or towing vehicles that do not exceed 10,000 pounds. Additionally, unless they have specific endorsements, they cannot operate vehicles carrying hazardous materials, school buses, or passenger vehicles designed to carry 16 or more occupants.
In Maine, the Class B CDL written test is typically offered in English. However, accommodations for non-English speakers may be available in some cases. It's recommended to contact the Maine Bureau of Motor Vehicles directly to inquire about language options and any possible translation services.
Yes, you can request accommodations for the Class B CDL written exam in Maine if you have a disability. The Bureau of Motor Vehicles (BMV) provides reasonable testing accommodations according to the Americans with Disabilities Act (ADA). You'll need to provide documentation of your disability and specific accommodation needs to the BMV prior to scheduling your exam.
Yes, if you don't pass the Class B CDL written test in Maine, you can retake it. However, you must wait a minimum of one day before retesting. There may also be retesting fees you'll need to pay. It's recommended to study the Maine Commercial Driver Manual thoroughly before reattempting the test.
