Knowledge Test Class A #1
Class A Driving Test | Kansas 2026 #1 Page 7 of 7
Train for FREE online with our Kansas class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KS CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
43 . Which of the following is not an activity that causes a distraction?
Checking your mirrors
Anything that takes your attention away from driving can be a dangerous distraction. This includes eating, drinking, smoking, or adjusting the vehicle's audio and climate controls.
44 . When a vehicle is started, warning lights and buzzers:
Should not come on.
After an engine is started, the warning lights and buzzers for oil, coolant, charging circuits, and the Anti-Lock Braking System (ABS) should go out right away.
45 . When taking the basic control skills test, drivers are:
Allowed to leave the vehicle, but only if the vehicle is placed in neutral and the parking brake is set.
During the basic vehicle control skills test, you must place the vehicle in neutral and set the parking brake before exiting the vehicle to check its position. You may check the position of the vehicle no more than twice, except during the straight line backing exercise, where you may look no more than once.
46 . When traction is poor, a driver should accelerate slowly:
To be the last vehicle through an intersection.
Speeding up too quickly on a road with poor traction could cause a driver to lose control of their vehicle. In conditions that cause poor traction, a driver should accelerate especially smoothly and gradually.
47 . Failing to exit your vehicle properly during an exercise in the basic vehicle control skills test will result in:
An extra point against your score.
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
48 . Which of the following is not a rule for using turn signals?
Don’t signal unless another vehicle is close.
Always signal before a turn or lane change. Begin signaling well in advance of the movement and keep the signal on continuously during the turn. If it is not self-canceling, make sure to turn your signal off after your turn or lane change is complete.
49 . While driving any vehicle in Kansas:
Only reading a text from an employer is permitted.
It is both illegal and dangerous to send or read text messages while driving in the state of Kansas.
50 . If you are turning left and there are two available left turn lanes, which lane should you choose?
Trucks should not turn where there are two left turn lanes.
A large vehicle may need to swing right to make a left turn. If an intersection has two left turn lanes, the driver should choose the righthand land to begin their turn.
Search the best driving school in your neighbourhood
2026 Kansas | Frequently Asked Questions
To acquire a CDL Tank endorsement in Kansas, you will need to pass the written knowledge test specific to tank vehicles. Study the Kansas CDL Manual and take practice tests to prepare. Once you feel confident, schedule an appointment at your local Kansas DMV office to take the test. If you pass, you will receive your CDL Tank endorsement.
To obtain a CDL Tank license in Kansas, you must already possess a valid Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Test which covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules. It's recommended to study the state's CDL manual before taking the test.
While Kansas does not specifically require training or experience to obtain a CDL Tank endorsement, it's highly recommended. The endorsement test covers specific knowledge about handling and driving tank vehicles. Studying the state's CDL manual, taking practice tests, and possibly enrolling in a training course can significantly increase your chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Kansas, you must pass the Tank Vehicle Endorsement Test. This written test covers specific knowledge about inspecting and driving tank vehicles, understanding the vehicle's structure, and following safe driving rules. It's recommended to thoroughly study the Kansas CDL manual before taking the test.
The written test for the CDL Tank endorsement in Kansas covers various subjects. These include knowledge of inspecting tank vehicles, understanding the vehicle's structure, recognizing high center of gravity and its effects, handling surge, and adhering to safe driving rules. The test also covers procedures for emergencies and loading/unloading of tanks.
The CDL Tank endorsement written test doesn't assess specific driving maneuvers. Instead, it evaluates knowledge on relevant topics such as the inspection of tank vehicles, understanding the high center of gravity, dealing with surge, handling unstable loads, and safe driving rules. Practical skills are usually assessed during the general CDL driving test or through on-the-job performance.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They must only drive tank vehicles consistent with their license class and endorsements. They must follow all specific safety protocols related to loading, unloading, and handling of tank vehicles. Additionally, they must comply with hours of service regulations and cannot transport hazardous materials unless they also have a Hazmat endorsement.
No, it's illegal to transport liquid or gas materials without a valid CDL Tank endorsement in Kansas. This endorsement is required for operating a tank vehicle, which is defined as any commercial vehicle designed to transport any liquid or gaseous materials within a tank of 1,000 gallons or more. Violations can result in fines and license suspension.
In Kansas, the CDL Tank endorsement can be added to your existing commercial driver's license. You don't need a fresh application for a new license. However, you must pass the Tank Vehicle written test. After passing the test, you pay a fee to add the endorsement to your current CDL. Always check with your local DMV for the most current procedures and fees.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional prerequisites. Drivers must also possess a Hazardous Materials (HazMat) endorsement. This requires passing a written test on federal and state regulations for transporting hazardous materials, and undergoing a federal security threat assessment, which includes fingerprinting and a background check.
