Bus #2
Bus Driver Testing | Kansas 2025 #2
Train for FREE online with our KS bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Kansas in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
1 . In an engine compartment, loose belts will:
Last longer than tight belts.
Be sure to check the tightness of the belts in your engine compartment. Loose belts will not turn the water pump and/or fan properly, which can lead the engine overheating.
2 . The inside rearview mirror of a school bus is used to:
See in front of the bus.
On a school bus, the overhead inside rearview mirror is used to monitor passenger activity inside the bus.
3 . Which of the following surfaces provides the least amount of traction?
Dry pavement
Be especially cautious when driving on ice that has begun to melt. Ice that is wet is much more slippery than ice that is dry.
4 . When loading a trailer, weight should be:
Placed only on the right side, if possible.
Weight of cargo should be loaded into a trailer as low as possible. If the weight of cargo is positioned too high in a trailer, it will put the vehicle at risk of tipping over.
5 . Poor weight balance:
Makes a vehicle easier to stop.
If the weight of a load is poorly balanced, it can lead to difficult and unsafe handling of a vehicle.
6 . What is a tire load?
The weight of the air within a fully inflated tire
Tire load is the maximum weight that a tire can safely carry at a specified pressure. This will be stated on the side of a tire.
7 . Improperly loaded cargo can:
Aid in safety.
Cargo must be properly loaded and secured to prevent it from falling or shifting dangerously. During a quick stop, improperly loaded cargo could injure or even kill the driver.
2025 Kansas | Frequently Asked Questions
To acquire a CDL Tank endorsement in Kansas, you will need to pass the written knowledge test specific to tank vehicles. Study the Kansas CDL Manual and take practice tests to prepare. Once you feel confident, schedule an appointment at your local Kansas DMV office to take the test. If you pass, you will receive your CDL Tank endorsement.
To obtain a CDL Tank license in Kansas, you must already possess a valid Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Test which covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules. It's recommended to study the state's CDL manual before taking the test.
While Kansas does not specifically require training or experience to obtain a CDL Tank endorsement, it's highly recommended. The endorsement test covers specific knowledge about handling and driving tank vehicles. Studying the state's CDL manual, taking practice tests, and possibly enrolling in a training course can significantly increase your chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Kansas, you must pass the Tank Vehicle Endorsement Test. This written test covers specific knowledge about inspecting and driving tank vehicles, understanding the vehicle's structure, and following safe driving rules. It's recommended to thoroughly study the Kansas CDL manual before taking the test.
The written test for the CDL Tank endorsement in Kansas covers various subjects. These include knowledge of inspecting tank vehicles, understanding the vehicle's structure, recognizing high center of gravity and its effects, handling surge, and adhering to safe driving rules. The test also covers procedures for emergencies and loading/unloading of tanks.
The CDL Tank endorsement written test doesn't assess specific driving maneuvers. Instead, it evaluates knowledge on relevant topics such as the inspection of tank vehicles, understanding the high center of gravity, dealing with surge, handling unstable loads, and safe driving rules. Practical skills are usually assessed during the general CDL driving test or through on-the-job performance.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They must only drive tank vehicles consistent with their license class and endorsements. They must follow all specific safety protocols related to loading, unloading, and handling of tank vehicles. Additionally, they must comply with hours of service regulations and cannot transport hazardous materials unless they also have a Hazmat endorsement.
No, it's illegal to transport liquid or gas materials without a valid CDL Tank endorsement in Kansas. This endorsement is required for operating a tank vehicle, which is defined as any commercial vehicle designed to transport any liquid or gaseous materials within a tank of 1,000 gallons or more. Violations can result in fines and license suspension.
In Kansas, the CDL Tank endorsement can be added to your existing commercial driver's license. You don't need a fresh application for a new license. However, you must pass the Tank Vehicle written test. After passing the test, you pay a fee to add the endorsement to your current CDL. Always check with your local DMV for the most current procedures and fees.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional prerequisites. Drivers must also possess a Hazardous Materials (HazMat) endorsement. This requires passing a written test on federal and state regulations for transporting hazardous materials, and undergoing a federal security threat assessment, which includes fingerprinting and a background check.