Knowledge Test Class A #2
Class A Driving Test | Oregon 2024 #2
Train for FREE online with our Oregon class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OR CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . During the vehicle inspection test, you must be able to do all of the following, except:
During the pre-trip vehicle inspection test, you will be asked to indicate where the power steering fluid dipstick or reservoir sight glass is located. You will need to show that the power steering fluid is within a safe operating range.
2 . What is a tire load?
The weight of the air within a fully inflated tire
Tire load is the maximum weight that a tire can safely carry at a specified pressure. This will be stated on the side of a tire.
3 . While driving downhill, you should brake until you reach a speed that is ____ below your safe speed, then release the brake pedal.
20 mph
While driving downhill, you should hold down the brake pedal until your vehicle reaches a speed 5 mph below your safe speed, then release the brake pedal. Repeat this process.
4 . A danger of swerving to avoid a hazard while driving a large truck is that:
While swerving can sometimes be the safest way to handle a hazard on the roadway, doing so is not without risk. Top-heavy vehicles and tractors with multiple trailers may flip over in a swerve.
5 . If a vehicle is equipped with power steering, the hoses should be checked:
For the proper amount of brake fluid.
When inspecting a vehicle that is equipped with power steering, check the hoses, pumps, and fluid level. In particular, you should look for leaks in the hoses.
6 . When carrying a wide load, you should:
Drive on the shoulder.
