Class A Driving Test | Washington 2026 #2

Train for FREE online with our Washington class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

1 . If you are taking the driving test and the route does not include a railroad crossing, you:

Will not have to do anything related to a crossing.

May have to explain how you would cross railroad tracks.

Will have to take a different route.

During the on-road driving test, if your route does not include a railroad crossing, the examiner may ask you to explain and demonstrate the necessary procedures at a simulated location.

2 . Too much air pressure in a tire:

Is not possible.

Is encouraged on long drives.

Can be dangerous.

Tires should never have too much air pressure. Be sure to check your tires' air pressure with a gauge during inspections.

3 . When transporting a load, the cargo should be inspected:

Only at the beginning of a drive.

Only after driving a long distance.

After every break.

Cargo and its securing devices must be inspected before starting a trip. After beginning a trip, the driver should check the load and securing devices within the first 50 miles on the road, every three hours or 150 miles traveled, and after every break.

4 . Scan the road ____ ahead of your vehicle.

Two to three seconds

Five to six seconds

12 to 15 seconds

Good drivers scan the road at least 12 to 15 seconds ahead of their vehicles. Looking ahead will allow you to identify and react to hazards before meeting them. Be sure to specifically look for vehicles that are coming onto the highway, entering into your lane, or turning.

5 . What is the slow vehicle rule?

A vehicle cannot travel more slowly than 35 mph on a two-lane road.

The driver of a slow-moving vehicle on a two-lane road must pull over if there are five or more vehicles behind them.

A vehicle must travel at the same rate of speed as any other vehicle on the road.

Washington State's slow vehicle rule states that if you are driving slowly on a two-lane road and there are five or more vehicles backed up behind you, you must pull off of the roadway at the first available safe turnout to let the other drivers pass.

6 . Cargo being transported should be checked:

Only before the trip.

Before the trip and again within the first 50 miles of the trip.

Only by the loading personnel.

Cargo should be inspected before beginning a trip, within the first 50 miles of the trip, and every three hours or 150 miles traveled thereafter. Cargo should be inspected every time the driver stops to take a break. The driver of a truck transporting cargo is responsible for the cargo being safely secured throughout the trip.

7 . When loading cargo, it is important to:

Stack items as high as possible.

Know the weight capacity rating of the suspension system.

Place light items underneath heavier items.

It is a driver's responsibility to make sure their vehicle is not overloaded. They must be aware of legal weight limits and the maximum weight that their vehicle is rated to carry, including the weight capacity rating of the suspension system.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2026 Washington | Frequently Asked Questions

A CDL Class A license in Washington is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, given that the GVWR of the vehicle(s) being towed is in excess of 10,000 pounds.

A Class A Commercial Driver's License (CDL) in Washington allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the GVWR of the vehicle(s) being towed exceeds 10,000 pounds. This includes but is not limited to tractor-trailers, truck and trailer combinations, and tank vehicles.

To obtain a Class A CDL license in Washington, you must be at least 18 years old (21 for interstate driving), possess a valid Washington state driver's license, pass a vision test, and pass knowledge and skills tests. You'll also need to provide proof of U.S. citizenship or lawful permanent residency, and meet medical requirements.

In Washington, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving (within Washington only). However, federal regulations require drivers to be at least 21 years old to drive a commercial vehicle interstate (across state lines) or to haul hazardous materials.

While not always required, specific endorsements may be necessary for a Class A CDL license depending on the type of vehicle you'll operate or cargo you'll carry. These can include endorsements for double/triple trailers, tanker vehicles, passenger vehicles, or hazardous materials. Each endorsement requires additional knowledge tests and sometimes a skills test.

The Class A CDL skills test in Washington encompasses three parts: the pre-trip inspection, basic vehicle controls, and on-road driving. The pre-trip inspection checks your ability to assess your vehicle's safety. Basic vehicle controls assess your ability to maneuver and control the vehicle. The on-road driving test evaluates your driving skills in various traffic situations.

Yes, Class A CDL license holders in Washington may face limitations based on their specific endorsements and restrictions. For instance, without the proper endorsements, they cannot operate vehicles with air brakes, transport passengers, or haul hazardous materials. Additionally, restrictions may be placed on licenses due to medical conditions or lack of skills.

Yes, it is possible to take the written Class A CDL test in languages other than English in Washington. The Department of Licensing offers the test in several languages. However, federal regulations require anyone applying for a commercial driver license (CDL) to understand and read English to ensure safety on the roads.

Yes, you can request accommodations for the Class A CDL written test if you have a disability. Washington's Department of Licensing is committed to providing equal access to its services. If you have special needs, contact your local driver licensing office to discuss your situation and determine what accommodations can be made.

If you don't pass the Class A CDL written test in Washington, you can retake it. However, you must wait at least one day before retaking the test. Keep in mind that there may be additional fees for each attempt. It's advisable to study thoroughly before retaking the test to increase your chances of passing.