Class A Driving Test | Washington 2025 #1

Train for FREE online with our Washington class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

1 . The Individual Vehicle Distance Record (IVDR) does not need to include which of the following?

Trip origin

Vehicle Identification Number

Number of meals eaten by the driver

An Individual Vehicle Distance Record (IVDR) must include information about the distance traveled by a vehicle and the amount of fuel purchased. The required distance information includes the origin and destination points of the trip and the Vehicle Identification Number.

2 . During a basic vehicle control skills test, a look is when:

A driver checks the gauges on their instrument panel.

A driver checks their blind spots.

A driver walks to the back of their vehicle to check its position.

A driver uses a look when they open their door, leave their seated position, and walk to the back of the vehicle to check its position. During the straight line backing exercise, a driver may not exceed one look. During any other exercise, a driver may not exceed two looks.

3 . What kind of force do emergency brakes use?

Air pressure

Mechanical

Heavy

Air brakes are really three different braking systems: the service brake, the parking brake, and the emergency brake. Emergency and parking brakes are applied with mechanical force.

4 . On flat surfaces, wheel chocks:

Can be used to prevent a parked vehicle from moving.

Make it easier for a parked vehicle to roll.

Should only be used on the front driver's side tire.

In situations where a driver cannot use a parking brake, wheel chocks can be used to hold a parked vehicle in place on a level surface.

5 . On a slippery road, a driver should:

Make turns as quickly as possible.

Refrain from passing slower vehicles.

Stop quickly.

Under slippery conditions, you should drive slowly and smoothly. Make turns as gently as possible and do not pass other vehicles unless you have to.

6 . Looking far ahead of your vehicle while driving is:

Discouraged, as there is little you can do about something far up the road.

Encouraged to help you identify hazards as early as possible.

Not permitted.

Good drivers look down the road at least 12 to 15 seconds ahead of their vehicles. This makes it possible to identify hazards early, when drivers are more likely to have time to respond appropriately.

7 . If you must leave the roadway and drive on the shoulder in an emergency situation, you should:

Brake as hard as possible.

Get both sets of wheels onto the shoulder.

Stay on the shoulder until your vehicle has stopped, if possible.

If you must drive onto the shoulder to avoid a hazard, stay on it until you come to a stop; then signal, check your mirrors, and merge back into traffic. Avoid braking on the shoulder at speeds higher than about 20 mph. To help maintain control, always keep one set of wheels on the pavement, if possible.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2025 Washington | Frequently Asked Questions

To obtain a CDL Tank endorsement in Washington, you first need a Commercial Driver's License (CDL). Then, study the "Transporting Cargo Safely" section of the Washington CDL manual. After studying, take the written tank vehicle test at a Department of Licensing office. If you pass, the tank endorsement will be added to your CDL.

To obtain a CDL Tank license, you first need a basic Commercial Driver's License (CDL). You then need to study the relevant sections of your state's CDL manual, focusing on transporting cargo safely. After studying, you must pass a written tank vehicle test at your local Department of Licensing office. Once passed, the tank endorsement is added to your CDL.

While specific training or experience isn't legally required to obtain a CDL Tank endorsement in Washington, it's advisable to study the "Transporting Cargo Safely" section of the CDL manual thoroughly. Experience driving similar vehicles can also be beneficial. Ultimately, you must pass a written tank vehicle test at a Department of Licensing office.

Yes, an additional written knowledge test is required for the CDL Tank endorsement. The test focuses on the specific knowledge needed to safely operate tank vehicles. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and recognizing hazards. Studying the Commercial Driver Guide provided by the Washington State Department of Licensing will help prepare for this test.

The written test for the CDL Tank endorsement covers various topics related to safely transporting liquids and gases. Subjects include understanding bulk tank loading, unloading, and inspecting procedures, recognizing the dangers of surge, handling high center of gravity, and knowing how to control internal tank pressure among others. It's crucial to study these areas thoroughly.

The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. You'll be tested on understanding of safe loading and unloading procedures, handling of surge, control of internal tank pressure, and awareness of high center gravity risks. Practical driving skills are typically assessed during the general CDL skills test rather than the tank endorsement test.

Drivers with a CDL Tank endorsement must adhere to specific regulations and safety guidelines when transporting liquids or gases. They must understand the unique risks associated with this type of cargo, such as surge and high center of gravity. However, they are not restricted from driving other types of commercial vehicles unless there are additional endorsements or restrictions on their license.

No, a valid CDL Tank endorsement is required to transport liquid or gas materials in the United States. This endorsement ensures the driver has the necessary knowledge and skills to handle such materials safely. Driving without the proper endorsement can result in legal penalties, including fines and suspension of driving privileges.

The CDL Tank endorsement can be added to your current CDL. You don't need a fresh application for a new license. However, you will need to pass a knowledge test related to tank vehicle operation. Once you pass the test, the endorsement will be added to your existing CDL.

Yes, to handle hazardous materials with a CDL Tank endorsement, drivers must also have a Hazardous Materials (HazMat) endorsement. They must pass a written test regarding the safe transportation of hazardous goods and undergo a federal background check. Understanding safety protocols, emergency procedures, and federal regulations is crucial for handling these materials.