Tank Endorsement Test | Texas 2024 #2

Train for FREE with our Texas tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TX tank license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 22

1 . Class 1, Class 2.1, and Class 3 items should not be placed in a trailer with:

A heater.

An air conditioner.

Other items.

Batteries.

The use of cargo heaters is not always permitted. When transporting materials that are categorized as Class 1 (Explosives), Class 2.1 (Flammable Gas), or Class 3 (Flammable Liquids) materials, heaters are generally prohibited.

2 . When approaching your vehicle, you should ensure that:

The vehicle is shiner than others.

The vehicle is not parked too closely to other vehicles.

There are not puddles under the vehicle that indicate a leak.

The vehicle is parked properly.

When approaching your vehicle before an inspection, make note of its general condition and ensure that it is not damaged or leaning. Look under the vehicle for fresh leaks. Check around the vehicle for hazards to movement, such as people, other vehicles, or low-hanging wires or tree limbs.

3 . Large combination vehicles take the longest amount of time to stop:

When fully loaded.

When partially loaded.

When empty.

When mostly loaded.

Large combination vehicles take longer to stop when they are empty than when they are loaded. The decreased weight causes a vehicle's wheels to have decreased traction on the surface of the road.

4 . Of the following, which is not a way to prevent drowsiness during a trip?

Getting an adequate amount of sleep before driving

Traveling with a passenger

Scheduling trips during hours when you would not normally be awake

Avoiding medications that may cause drowsiness

Driving while fatigued can be extremely dangerous. Strategies for preventing drowsiness while driving include getting a full night's sleep before a trip; having someone ride with you so you can take turns driving; scheduling trips for times during which you are normally awake; and avoiding medications that may cause drowsiness.

5 . How should you check your hydraulic brakes?

Pump the brakes three times, then apply firm pressure to the brake pedal for five seconds. The brake pedal should not move.

Pump the brakes three times, then apply firm pressure to the brake pedal for five seconds. The brake pedal should slowly move toward the floor.

Pump the brakes three times, then apply firm pressure to the brake pedal for five seconds. The brake pedal should slowly rise.

Pump the brakes three times, then apply firm pressure to the brake pedal for five seconds. The brake pedal should be easy to push to the floor.

To test hydraulic brakes, you should pump the brake pedal three times, then apply firm pressure to the brake pedal and hold for five seconds. The pedal should not move. If it does, there may be a leak.

6 . When driving a bobtail tractor, you should be aware that:

Bobtails stop very easily.

Bobtails cannot drive as fast as tractors with semitrailers.

Bobtails are more difficult to stop than tractors with semitrailers.

Bobtails are illegal in most states.

Bobtail tractors are tractors that are not attached to any semitrailers. When operating a bobtail, you should be aware that stopping can be difficult and that it will take a longer distance to bring the bobtail to a complete stop than it would a tractor attached to a loaded semitrailer.

7 . When loading or unloading explosive materials, you should:

Keep the engine running.

Turn off the engine.

Use sharp-pointed tools to open the packages.

Toss packages.

Always turn off your vehicle's engine before loading or unloading explosive materials. Never drop, throw, or roll packages containing explosives.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Texas | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Texas, you must first have a Commercial Driver's License (CDL). Then, pass the Hazardous Materials Endorsement Knowledge Test at a Texas Department of Public Safety office. After passing, you'll need to undergo a TSA background check. Once cleared, the endorsement will be added to your CDL.

To obtain a CDL Hazmat license, you must first hold a valid Commercial Driver's License (CDL). You must be at least 21 years old and have a clean driving record. You'll also need to pass the Hazardous Materials Endorsement Knowledge Test and undergo a TSA background check. Good vision and physical health are also prerequisites.

When applying for a CDL Hazmat endorsement, you will need your current CDL, proof of U.S. citizenship or legal status (like a birth certificate or green card), and proof of identity and Texas residency. You'll also need your Social Security card and a completed Application for Texas Driver License or Identification Card. Lastly, you'll need to pass a TSA background check.

Yes, there is a dedicated written test for the CDL Hazmat endorsement. Called the Hazardous Materials Endorsement Knowledge Test, it covers topics like loading and unloading hazardous materials, bulk packaging marking, driving and parking rules, and emergency response procedures. This test must be passed to obtain the Hazmat endorsement.

The written test for the CDL Hazmat endorsement covers a range of subjects related to hazardous materials. These include recognizing hazardous materials, safe loading and unloading procedures, proper use of placards and labels, emergency response procedures, driving and parking rules for hazardous materials, and understanding the associated risks and regulations.

Yes, acquiring a CDL Hazmat endorsement comes with additional charges. These include a fingerprinting fee for the required TSA background check, and an endorsement fee. The exact costs can vary, so it's recommended to check with your local Department of Motor Vehicles (DMV) or similar agency for the most accurate information.

Yes, obtaining a CDL Hazmat endorsement requires a background check and security clearance. The Transportation Security Administration (TSA) conducts the check, which includes fingerprinting and a review of criminal, immigration, and terrorism records. This process is necessary to ensure the safety and security of hazardous materials transportation.

Yes, specialized training is required for the CDL Hazmat endorsement. Applicants must pass a written test, and in some cases, a driving test with a vehicle that carries hazardous materials. Once passed, this endorsement is added to your Commercial Driver's License (CDL). Regular renewal of this certification is also required.

No, you cannot legally transport hazardous materials without a valid Commercial Driver's License (CDL) with a Hazardous Materials (Hazmat) endorsement in the United States. This requirement ensures that drivers have the necessary training and knowledge to handle such materials safely, protecting public safety and the environment.

Yes, you can add the CDL Hazmat endorsement to your current CDL. You don't need to apply for a new CDL. However, you must pass the Hazmat knowledge test, undergo a TSA background check, and pay the required fees. Once completed, the endorsement will be added to your existing CDL.