FREE 2024 Texas CDL Practice Test for Passenger Endorsement Online
Train for FREE with our Texas CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TX DMV passenger endorsement in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
22
1 . When taking the on-road driving skills test, you will be evaluated on your gear usage. You should not:
Shift while taking a turn.
During the on-road driving skills test, you will be evaluated on your gear usage. Select a gear that does not rev or lug the engine; avoid grinding and clashing gears; and avoid shifting through turns or intersections.
2 . When traveling at speeds under 40 mph, you should maintain at least ____ of following distance for every 10 feet of your vehicle's length.
Four seconds
When traveling at speeds under 40 mph, you should allow a minimum of one second of following distance for every 10 feet of your vehicle's length. At faster speeds, add at least one additional second.
3 . Most heavy vehicles require ____ to change gears.
Triple shifting
Most heavy vehicles with manual transmissions require double clutching to change gears. A driver should release the accelerator, push in the clutch, and shift into neutral at the same time. After releasing the clutch and allowing the vehicle to change to the necessary speed, the driver should push in the clutch, shift gears, then simultaneously release the clutch and accelerate.
4 . If you are turning left and there are two available left turn lanes, which lane should you choose?
Trucks should not turn where there are two left turn lanes.
A large vehicle may need to swing right to make a left turn. If an intersection has two left turn lanes, the driver should choose the righthand land to begin their turn.
5 . Hydroplaning:
Happens most frequently when tires have good tread.
If there is enough water on the road, hydroplaning can occur at speeds as low as 30 mph. It is most likely if the tires' air pressure is too low or if tires' tread is worn.
6 . Which of the following is not a type of retarder?
Electric
Retarders are mechanisms in some vehicles that help slow a vehicle and reduce the need for braking. The four basic types of retarders are exhaust, engine, hydraulic, and electric.
7 . If you must drive in reverse, it is helpful to:
Stick your head out the window and look backward.
If you must drive in reverse, you should first walk around the vehicle to check for hazards in your path of travel. Make frequent use of the mirrors on both sides of your vehicle while backing. Always back up as slowly as possible.
See the exact questions that will be on the 2024 Texas DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Texas | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Texas, you need to have a valid CDL license first. Then, study the Texas CDL handbook's section on Doubles/Triples endorsement. Afterwards, schedule an appointment at your local DMV to take the written test. Upon passing, you'll receive your endorsement. Remember, some employers may require additional on-the-job training.
To obtain a CDL Doubles/Triples license in Texas, you need to have a basic CDL license first. Then, pass the Doubles and Triples Endorsement Test which covers coupling and uncoupling, inspecting doubles and triples, and checking air brakes. Additionally, you must pass a vision test and provide proof of medical fitness.
While Texas doesn't require specific experience for a CDL Doubles/Triples endorsement, it's recommended to have practice handling such large vehicles. A CDL training course can provide this. You must pass a written test on handling double/triple trailers. Knowledge of coupling/uncoupling, inspecting trailers and air brakes is necessary. Professional training can greatly improve your chances of passing the test.
Yes, to obtain a CDL Doubles/Triples endorsement in Texas, you must pass an additional written test. This test covers information specific to driving double and triple trailers such as coupling and uncoupling, inspecting doubles and triples, and the proper procedures for pulling double/triple trailers. No additional road test is required for this endorsement.
The CDL Doubles/Triples endorsement test in Texas is a written exam, not a skills test. It focuses on knowledge such as how to couple and uncouple correctly, inspecting doubles and triples, and checking air brakes. You'll need to understand safe driving techniques for these larger vehicles, but you won't perform actual driving maneuvers during the test.
No, it's not permissible to operate double/triple trailers without a valid CDL Doubles/Triples endorsement in Texas. The endorsement is a legal requirement, demonstrating that the driver has the necessary knowledge and skills to handle such large vehicles safely. Driving without the appropriate endorsement could result in penalties, fines, or even loss of your CDL.
You can add the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples knowledge test. Once you pass, the Texas Department of Public Safety will add the endorsement to your existing CDL.
Yes, there are constraints for drivers with a CDL Doubles/Triples endorsement. For instance, these drivers must comply with specific weight and length regulations for their vehicles. They may also face restrictions related to hazardous materials transport. Additionally, they must adhere to hours-of-service rules set by the Federal Motor Carrier Safety Administration to ensure safe driving practices.
In Texas, the maximum legal weight for a semi-truck is 80,000 pounds without an overweight permit. The maximum length for a single trailer is 59 feet, while double trailers can be up to 28.5 feet each, and triple trailers up to 28 feet each. However, triple trailers are not legal on all roads in Texas.
Yes, there are specific safety guidelines for driving double/triple trailers. Drivers must ensure proper coupling and uncoupling of units, maintain safe following distance, and manage high-speed and curve control. They must also be aware of the "crack-the-whip" effect that can occur when changing lanes or turning. Furthermore, drivers must abide by Federal Motor Carrier Safety Administration regulations for hours-of-service.
