FREE CDL Tank Endorsement Test Online | Colorado 2024
Train for FREE with our Colorado tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a CO tank license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.
20
16
20
1 . If using a helper while backing a vehicle, where should they stand?
Near the back of the truck
If you use a helper while backing your vehicle, they should stand near the back of the vehicle in a place where they are visible to you. Before backing, work out a set of hand signals that both you and your helper understand. Agree on a signal for "stop."
2 . Move over laws require:
All vehicles to move to the left lane if a flatbed trailer is in the right lane.
If an emergency vehicle with its lights on is stopped on the side of the road, move over laws require drivers to vacate the lane directly next to the vehicle, if possible. If a driver cannot move over safely, they must slow down and proceed with caution.
3 . Stopping distance can be affected by:
Traffic.
Stopping distance is affected by a vehicle's speed. The faster you are driving, the longer your stopping distance will become.
4 . When checking your tires, which of the following is not an issue to correct?
Tread depth of at least 4/32 of an inch on the front tires
Problems to check for when inspecting tires include: air pressure that is too low or too high; using radial and bias-ply tires together; tread depth of less than 4/32 of an inch in major grooves on front tires; and tread depth of less than 2/32 of an inch on all other tires.
5 . Roads are most slippery right after it begins to rain because:
Some tires are not designed for rain.
Roads are particularly slippery when it first begins to rain. The water mixes with oil drippings on the road that have not yet washed away, creating a slippery and dangerous mixture.
6 . If you are being tailgated, you should:
Allow the vehicle to pass.
If someone is tailgating you, it is a good idea to open up the space ahead of your vehicle to make it easier for the driver to pass you. Increasing your speed is not a good idea because the driver may continue to tailgate you at the higher speed, only increasing the danger.
7 . Rims with welding repairs:
Are acceptable in combination vehicles.
A driver should inspect wheels before a drive, specifically looking for damage on the wheels and rims. Wheels or rims that have had welding repairs are not safe for use.
Search the best driving school in your neighbourhood
2024 Colorado | Frequently Asked Questions
A CDL Class B license in Colorado allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or towing vehicles not exceeding 10,000 pounds GVWR. This includes buses, farm labor vehicles, and any vehicle designed to transport 16 or more passengers including the driver.
A Class B CDL license in Colorado allows the holder to operate single vehicles with a gross vehicle weight rating of 26,001 pounds or more, and towed vehicles not exceeding 10,000 pounds. It covers vehicles like city buses, delivery trucks, dump trucks with small trailers, and large straight trucks.
To acquire a Class B CDL license in Colorado, you must be at least 18 years old (21 for interstate driving), possess a valid Colorado driver's license, pass a vision test, and successfully complete a written knowledge test. Additionally, you must pass a skills test which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
In Colorado, you must be at least 18 years old to qualify for a Class B Commercial Driver's License (CDL) for intrastate driving (within Colorado only). However, you must be at least 21 years old to drive a commercial vehicle across state lines, carry hazardous materials, or transport passengers.
Specific endorsements aren't necessary for a Class B CDL license but they can broaden your driving capabilities. Endorsements include: H for hazardous materials, N for tank vehicles, P for passenger vehicles, S for school buses, and T for double/triple trailers. Each endorsement requires passing a knowledge test and some require a skills test.
The Class B CDL skills assessment in Colorado includes three parts: a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving test. You must demonstrate knowledge of your vehicle and its controls, show ability to manage its operation under various traffic conditions, and ensure it's safe for the road.
Yes, Class B CDL license holders in Colorado are restricted to operating vehicles with a GVWR of 26,001 or more pounds, or towing vehicles not more than 10,000 pounds. They can also operate buses with 24 passengers or more, including the driver. However, they cannot operate Class A vehicles unless they have the appropriate endorsements.
In Colorado, the written CDL test is offered only in English. Federal regulations mandate that all CDL applicants demonstrate proficiency in English. They must be able to read, write, speak, and understand the language to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class B CDL written exam in Colorado if you have a disability. You must provide documentation of your disability and specify the type of accommodation needed. The DMV is committed to providing equal access to its services and will make reasonable accommodations in accordance with the Americans with Disabilities Act.
Yes, you can retake the Class B CDL written test in Colorado. If you fail, you must wait one day before retaking it. If you fail three times, you must wait 30 days before your next attempt. Keep in mind each retest has an associated fee and make sure to study the manual thoroughly before retaking the test.
