FREE CDL Tank Endorsement Test Online | Idaho 2024
Train for FREE with our Idaho tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID tank license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.
20
16
20
1 . When leaving your vehicle:
Parking brakes should be used whenever you park. If necessary, chock your wheels.
2 . In general, before loading or unloading any flammable liquids, an engine should be:
Before loading or unloading a tank with flammable liquids, you should turn off the engine, unless running the engine is necessary to operate a pump. Ground the tank before opening the filling hole and maintain the ground until after closing the filling hole.
3 . Carrying liquids in a leaking tank:
It is illegal to transport liquids or gases in a leaking tank. Doing this could be dangerous and create the need for a costly clean-up.
4 . When you are behind the steering wheel, shipping papers should be:
When transporting hazardous materials, shipping papers should be kept in a pouch in the driver's side door, or in another location where the driver is able to easily reach them while their seat belt is fastened. The papers must be easily visible to anyone who is entering the cab.
5 . Who must label hazardous materials?
The shipper of hazardous materials is responsible for packaging, marking, and labeling the materials properly. It is a good idea for the driver to ensure the materials are properly labeled.
6 . If a shipping paper describes both hazardous and non-hazardous materials:
If a shipping paper lists both hazardous and non-hazardous materials, the hazardous materials must be entered first.
7 . When a vehicle is started, the coolant temperature should:
After an engine is started, the coolant temperature should rise gradually to a normal operating range.
See the exact questions that will be on the 2024 Idaho DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Idaho | Frequently Asked Questions
A CDL Class A license in Idaho is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle is heavier than 10,000 pounds. It typically covers vehicles like tractor-trailers, truck and trailer combinations.
A Class A CDL license in Idaho allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. The license covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more if the towed vehicle exceeds 10,000 pounds.
To obtain a Class A CDL license in Idaho, you must be at least 18 years old (21 for interstate driving), possess a valid Idaho non-commercial license, pass a vision test, and successfully complete knowledge and skills tests. You also need to provide proof of age, identity, residency, and social security number. Medical requirements must be met too.
In Idaho, you must be at least 18 years old to qualify for a Class A CDL license for intrastate driving (within Idaho). However, you must be at least 21 years old to drive a commercial vehicle across state lines, carry hazardous materials, or transport interstate freight within the state.
While specific endorsements are not required for a Class A CDL license, they can provide additional permissions. Endorsements include H for hazardous materials, N for tank vehicles, P for passenger vehicles, S for school buses, T for double/triple trailers. Each endorsement requires passing additional knowledge and skills tests.
The Class A CDL skills test in Idaho encompasses three main parts: a pre-trip inspection, a basic vehicle control test, and an on-road driving test. The pre-trip inspection assesses your ability to inspect your vehicle before driving. The basic control test evaluates your ability to maneuver and control the vehicle. The on-road test examines your on-road driving skills.
Yes, there are limitations. Class A CDL license holders in Idaho are not allowed to operate a vehicle with a Gross Vehicle Weight Rating (GVWR) of more than 26,001 pounds, or tow a vehicle heavier than 10,000 pounds unless they have the appropriate endorsements. They also cannot transport hazardous materials without an H endorsement or operate a passenger vehicle without a P endorsement.
In Idaho, the written Class A Commercial Driver's License (CDL) test is typically administered in English. However, some locations may offer the test in Spanish. It is important to note that all CDL holders must be able to read and speak English well enough to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class A CDL written test in Idaho if you have a disability. The Idaho Transportation Department complies with the Americans with Disabilities Act (ADA) and provides reasonable accommodations for applicants with disabilities. However, you must still meet the essential eligibility requirements for obtaining a CDL.
If you fail the Class A CDL written test in Idaho, you'll be allowed to retake the test. However, you have to wait at least three days before you can retake it. If you fail three times, you must wait 30 days before retesting. There's no limit to the number of times you can retake the test, but each attempt requires a new fee.
