Knowledge Test Class A #1

Class A Driving Test | Kansas 2024 #1

Train for FREE online with our Kansas class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KS CDL class A permit in 2024, practice as much as..

Train for FREE online with our Kansas class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KS CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

50
40
20

1 . If you are being tailgated, you should:

Allow the vehicle to pass. If you are being tailgated, it is best to allow more room to open up in front of your vehicle. This will help you avoid the need for sudden stops, which could result in the tailgater rear-ending you, and will make it easier for the tailgater to pass. Speeding up may only make things more dangerous by prompting the other driver to continue tailgating you at a higher speed.

2 . When driving in fog, you should:

Use the heater. If you must drive in fog, you should use your low beam headlights and fog lights, even during the day.

3 . A truck may need to be under the legal maximum weight limit when being driven:

At night. Under some driving conditions, it may not be safe to operate a vehicle at its full legal maximum weight. Keep this in mind when driving in poor weather or on mountainous roadways.

4 . The suspension system:

Lightens the load for the tires. The suspension system holds up the vehicle and its load while keeping the axles in place. Damage to a suspension system can be very dangerous.

5 . During the vehicle inspection portion of the skills test, an applicant will be required to:

Take apart the front brake. During the vehicle inspection skills test, you will need to explain to the examiner what you are inspecting and why.

6 . Multi-speed axles and auxiliary transmissions are used:

To make a vehicle less noisy. On many vehicles, multi-speed rear axles and auxiliary transmissions are used to provide extra gears. They are usually controlled by a selector knob on the gearshift lever.

7 . If you’re unfamiliar with the area in which you must back up, you should:

Turn on your high beam headlights. Backing is always dangerous because you cannot see everything behind your vehicle. Especially if you are unfamiliar with the area, you should get out of your vehicle and familiarize yourself with your path of travel before beginning to back up.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet
99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Search the best driving school in your neighbourhood