When using a fire extinguisher, you should stand as far away from the fire as possible. Aim the extinguisher at the base of the fire, not at the flames. If you are not sure which kind of extinguisher should be used on a fire, particularly a hazardous materials fire, you should wait for the firefighters to arrive and allow them to extinguish it.

Stand as far away from the fire as possible.

Get as close to the fire as possible.

Stand as far away from the fire as possible.

Aim the extinguisher at the top of the fire.

After a tire has been changed, you should stop after a short distance to re-check the tightness of the wheel nuts.

Ensure that the wheel nuts are tight on the newly-changed tire.

Ensure that there is still enough air pressure in the tire.

Ensure that the correct tire was changed.

Ensure that changing one tire did not damage another tire.

When making a left turn, you should wait until you reach the center of the intersection before actually beginning to turn. Due to off-tracking, the left side of your vehicle could hit another driver if you begin turning too early.

No sooner than the center of the intersection.

Before reaching the center of the intersection.

No sooner than the center of the intersection.

After your rear wheels have passed the center of the intersection.

If you are being tailgated, you should increase the distance between your vehicle and the vehicle ahead of you. This reduces the need for you to make sudden changes in speed or direction while making it easier for the tailgater to pass your vehicle.

Increase the amount of space between your vehicle and the vehicle in front of you.

After a vehicle is started, the warning lights and buzzers should go out after a few seconds. If the warning signals do not turn off, there may be something wrong with the vehicle.

Warning lights should come on and then quickly turn off.

The brakes should be locked up.

Warning lights should come on and then quickly turn off.

The coolant temperature will decrease.

Retarders help to slow vehicles, reducing drivers' need to use brakes.

A device that prevents a vehicle from going too fast

A device that prevents a vehicle from being too loud

A device that improves a vehicle's gas mileage

When approaching your vehicle before an inspection, make note of its general condition and ensure that it is not damaged or leaning. Look under the vehicle for fresh leaks. Check around the vehicle for hazards to movement, such as people, other vehicles, or low-hanging wires or tree limbs.

There are not puddles under the vehicle that indicate a leak.

The vehicle is shiner than others.

The vehicle is not parked too closely to other vehicles.

There are not puddles under the vehicle that indicate a leak.

The vehicle is parked properly.

Class A Driving Test | South Dakota 2024 #1 Page 7 of 7

Train for FREE online with our South Dakota class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a SD CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

Class A Driving Test | South Dakota 2024 #1 Page 7 of 7

43 . When using a fire extinguisher on a fire, you should:

44 . A driver should stop after a short distance after changing a tire to:

45 . When making a left turn, you should start the turn:

46 . If being tailgated, you should:

47 . When an engine is started:

48 . What is a retarder?

49 . Cargo on flatbed trailers should be:

50 . When approaching your vehicle, you should ensure that:

See the exact questions that will be on the 2024 DMV exam.

Wait, before you go