Knowledge Test Class A #1
Class A Driving Test | Montana 2025 #1 Page 4 of 7
Train for FREE online with our Montana class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
22 . During a static leakage test, the maximum leakage rate for a single vehicle with air brakes is ____ in one minute.
4 psi
When performing a static leakage test on a single vehicle with air brakes, the leakage rate should be no more than 2 psi in a minute. If air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
23 . When checking the exhaust system, it should be:
Cracked.
When checking the exhaust system, you should verify that no parts of the system are loose, broken, or missing.
24 . Belts in the engine compartment should be:
Easy to slide off.
When inspecting your vehicle's engine, check the belts for tightness and excessive wear. The amount of "give" that is safe for each belt in a given engine will vary, so learn what is appropriate for your vehicle.
25 . You may be an aggressive driver if you:
Avoid being an aggressive driver by being realistic about your travel time, making allowance for delays, maintaining reasonable following distances, and not making hand gestures that could anger another driver.
26 . When entering a curve, you should:
Take the vehicle out of gear.
Always reduce your speed and downshift before entering a curve.
27 . A person working on a disabled vehicle on the shoulder of a road:
Should not be assisted.
Be cautious when driving near people who are working on disabled vehicles. The task will likely consume their attention, so they may not be aware of traffic or other hazards on the road.
28 . If a vehicle is power steering-equipped, the hoses should be:
When inspecting a vehicle equipped with power steering, you should inspect the hoses, pumps, and fluid levels. Specifically check the hoses for leaks.
2025 Montana | Frequently Asked Questions
A CDL Class A license in Montana is defined as a commercial driver's license permitting the holder to operate any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the GVWR of the vehicle(s) being towed is over 10,000 pounds. It covers vehicles like tractor-trailers, truck and trailer combinations.
A Class A CDL license in Montana allows you to operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, and livestock carriers. It covers any combination of vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, provided the towed vehicle(s) is over 10,000 pounds.
To obtain a Class A CDL license in Montana, you must be at least 18 years old (21 for interstate driving), possess a valid Montana driver's license, pass a vision test, and successfully complete both a written knowledge test and a skills test which includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving exam.
In Montana, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving (within Montana only). However, to drive interstate (across state lines) or carry hazardous materials, you must be at least 21 years old.
Endorsements are not required for a Class A CDL license, but they provide additional driving privileges. For instance, you may need a Hazardous Materials (H) endorsement to haul hazardous freight, a Tank (N) endorsement to drive tank vehicles, or a Passenger (P) endorsement to transport passengers. Each endorsement requires passing a specific knowledge test.
The Class A CDL skills test in Montana includes three sections: a pre-trip vehicle inspection to ensure the vehicle is safe to drive, a basic vehicle control test to verify your ability to control the vehicle, and an on-road driving exam to assess your ability to drive the vehicle in various road and traffic conditions.
Yes, there are limitations imposed on Class A CDL license holders. Some limitations or restrictions may include: not being permitted to operate a manual transmission if you passed your test in an automatic vehicle, not being allowed to drive a school bus without the proper endorsement, or being required to wear corrective lenses while driving if it's indicated on the license.
In Montana, the written Class A CDL test is primarily administered in English. This is in line with Federal regulations requiring all commercial drivers to read and speak English sufficiently to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, in Montana, accommodations can be made for the Class A CDL written test if you have a disability. You'll need to provide documentation of your disability and specify the type of accommodation needed. It's recommended to contact the Montana Motor Vehicle Division beforehand to ensure all necessary arrangements are made.
Yes, if you don't pass the Class A CDL written test in Montana, you can retake it. However, you must wait at least one day before attempting the test again. Keep in mind that each retest may involve additional fees. It's recommended to review and study the areas you struggled with before retaking the test.