Knowledge Test Class A #2
Class A Driving Test | Minnesota 2026 #2
Train for FREE online with our Minnesota class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MN CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . If being tailgated while driving a large vehicle, you should do all of the following, except:
Try to let the other vehicle pass.
If you are being tailgated, avoid making quick changes in speed and open up your following distance. This will make it easier for the tailgater to pass you. Increasing your speed is not a good idea because the driver may continue to tailgate you at the higher speed, only increasing the danger.
2 . If an aggressive driver is involved in a crash on the road ahead of you, you should:
Pull over and yell at the driver.
If you observe a crash involving an aggressive driver, you should stop a safe distance from the crash scene, wait for police to arrive, and inform them of the aggressive behavior you witnessed.
3 . You may send text messages while driving.
Sending or reading text messages while driving is both illegal and extremely dangerous.
4 . It is normal for fresh oil to be found on the pavement under a vehicle.
When approaching your vehicle before a trip, you should look underneath it to make sure there are no fresh oil, coolant, grease, or fuel leaks on the ground. Leaks can indicate unsafe defects on a vehicle.
5 . The heavier the vehicle, the quicker it can stop.
The brake systems on heavy-duty vehicles are designed to work best when the vehicle is fully-loaded. Compared to heavy vehicles, empty trucks require longer stopping distances because their tires have less traction.
6 . After starting the engine, the Anti-Lock Braking System (ABS) light stays on if:
The Anti-Lock Braking System (ABS) indicator light should come on after an engine is started. The light will then turn off. If the light remains on, the ABS it not working properly.
7 . Steering wheel play should be no more than:
75 degrees.
Steering wheel play of more than 10 degrees (about two inches of movement at the rim of a 20-inch steering wheel) can make it difficult to steer.
See the exact questions that will be on the 2026 Minnesota DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2026 Minnesota | Frequently Asked Questions
To acquire a CDL Tank endorsement in Minnesota, you must first possess a valid Commercial Driver's License (CDL). Then, study the Minnesota CDL handbook's tank vehicle section. Afterward, schedule and pass a Tank Vehicle written test at your local Department of Motor Vehicles (DMV). Successful completion of the test will add the endorsement to your CDL.
Obtaining a CDL Tank license requires a valid Commercial Driver's License (CDL). You must study the tank vehicle section of the CDL handbook thoroughly. After understanding the material, schedule and pass a Tank Vehicle written test at your local DMV. Once you pass the test, the tank endorsement will be added to your CDL.
While specific training or experience isn't mandatory for a CDL Tank endorsement, it's highly beneficial. Understanding the material in the tank vehicle section of the CDL handbook is crucial. Passing the Tank Vehicle written test at your local DMV is required. Practical experience or training can help you better understand the rules and operations, increasing your chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Minnesota, applicants must pass a specific written knowledge test. This test focuses on the safe transportation of liquid and gaseous materials. It's administered by the Minnesota Department of Public Safety and is in addition to the general CDL requirements.
The written test for a CDL Tank endorsement covers a variety of topics, including the inspection of tank vehicles, correct loading and unloading procedures, driving stability and handling, and the correct response to emergencies or hazardous conditions. It's key to study these areas thoroughly to pass the test and obtain your endorsement.
The CDL Tank endorsement assessment doesn't typically involve a skills or driving test. It focuses on the written exam which tests knowledge on specific topics like inspecting tank vehicles, understanding weight distribution, handling high center of gravity, and dealing with surge. However, general CDL testing will assess your ability to safely operate and maneuver the vehicle.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. For example, they are only allowed to operate vehicles that carry liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. They must also adhere to strict safety and operational regulations.
No, liquid or gas materials cannot be transported without a valid CDL Tank endorsement. If a driver is caught transporting these materials without the proper endorsement, they could face serious penalties such as fines, suspension of their CDL, or even jail time. This endorsement is crucial for safety and regulatory compliance.
To add the CDL Tank endorsement to your current license in Minnesota, you will need to complete a fresh application. You must pass the written knowledge test specific to the Tank endorsement and provide the necessary documentation. Additionally, you may need to pass a skills test depending on the type of tank vehicle you will be operating.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional training and certification, known as a Hazmat endorsement. This ensures drivers are knowledgeable about the risks and safety procedures associated with transporting hazardous materials. Additionally, a federal background check is required to obtain a Hazmat endorsement.
