Knowledge Test Class A #2
Class A Driving Test | Idaho 2025 #2 Page 2 of 7
Train for FREE online with our Idaho class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
8 . To prevent your vehicle from rolling backward when beginning to move, you can:
To ensure that your vehicle does not roll backward when beginning to move after a stop, you should partly engage the clutch before removing your right foot from the brake pedal.
9 . When making tight maneuvers, it is important for a driver to:
While regular mirror checks should always be part of your driving routine, you should make a particular point of checking the mirrors when changing lanes, turning, merging, or making tight maneuvers.
10 . When loading a trailer, you should:
A load of cargo must be properly balanced. Placing too much weight over an axle can damage the axle and make it more difficult for you to steer. Placing too little weight over an axle can cause poor traction, also leading to difficult handling.
11 . Mirrors should be checked:
Always check for traffic in your mirrors before changing lanes. Frequent mirror checks should be a part of your normal scanning routine.
12 . One way to avoid becoming an aggressive driver is to:
To help avoid frustration, which can lead to aggressive driving behavior, you should begin a trip with realistic expectations about your travel time. Plan ahead to allow time for potential traffic delays. Other strategies to help prevent aggressive driving behavior include driving an appropriate speed and keeping a reasonable following distance; avoiding making gestures at other drivers; and keeping your hands on the steering wheel.
13 . Wheel rims that have been welded should:
Wheels or rims that have had welding repairs are not safe to be used.
14 . Be sure that your wheel bearing/seals are:
During an inspection, ensure that the wheel bearing/seals are not leaking.
Search the best driving school in your neighbourhood
2025 Idaho | Frequently Asked Questions
To secure a CDL Bus endorsement in Idaho, you must first have a Commercial Driver's License (CDL). Next, you'll need to pass a passenger endorsement test covering topics like vehicle inspection, loading/unloading passengers, and emergency procedures. You also need to pass a skills test in a vehicle similar to the one you'll be driving. Check with the Idaho Transportation Department for more details.
To obtain a CDL Bus license in Idaho, you need to have a valid driver's license, pass a physical examination, and complete a CDL training course. Afterward, you'll take a written knowledge test and a skills test, which includes pre-trip vehicle inspection, basic vehicle control, and on-road driving. You also need to pass the Passenger Endorsement test for bus drivers.
Yes, training is necessary for a CDL Bus endorsement in Idaho. You must complete a CDL training course that includes both classroom instruction and behind-the-wheel training. After the course, you'll need to pass a written knowledge test and a skills test. Some employers may also require previous driving experience. Check with the Idaho Transportation Department for specific requirements.
CDL Bus licenses in Idaho are categorized into three classes based on the vehicle's size and purpose: Class A, B, and C. Class A is for vehicles over 26,001 pounds or towing over 10,000 pounds. Class B is for vehicles over 26,001 pounds or towing vehicles less than 10,000 pounds. Class C is for transporting 16 or more passengers (including driver) or hazardous materials.
No, you cannot use your personal vehicle for the CDL Bus driving test in Idaho. The vehicle you use for the test must match the class and type of vehicle you plan to drive with your CDL. Therefore, you must use a commercial bus for your bus endorsement driving test. This ensures that you can handle the size and complexity of such vehicles.
During the CDL Bus driving test in Idaho, examiners assess your ability to safely operate a commercial bus. Skills evaluated include pre-trip vehicle inspection, basic vehicle control (like turning, stopping, and backing up), and on-road driving (like lane changes, intersections, and highway driving). You'll also be tested on specific bus operations like loading/unloading passengers, railroad crossing procedures, and emergency exit procedures.
Yes, to obtain a CDL Bus endorsement in Idaho, you must meet specific medical requirements. You're required to pass a Department of Transportation (DOT) physical examination every 24 months to ensure you're physically capable of safe driving. The exam covers vision, hearing, blood pressure, and checks for conditions like diabetes or epilepsy that could interfere with driving safety.
No, it is not permissible to transport passengers without a valid CDL Bus endorsement in Idaho. The law requires any driver operating a commercial vehicle designed to carry 16 or more passengers, including the driver, to hold a valid Commercial Driver's License (CDL) with a Passenger (P) endorsement. Operating without this could lead to serious legal consequences.
Yes, the CDL Bus endorsement can be added to your existing CDL. In Idaho, you don't need to apply for a new license. However, you're required to pass the passenger transport test, and in some cases, a driving skills test in the type of vehicle you will be driving. Once you pass, the endorsement is added to your CDL.
Yes, drivers with a CDL Bus endorsement in Idaho must adhere to certain restrictions. They must not have more than one serious traffic violation in three years, and must not have any DUI convictions in the past five years. Additionally, they must pass the required knowledge and skills tests, maintain a clean driving record, and meet physical qualification standards.
