Tank #1

Tank Endorsement Test | Utah 2025 #1

Train for FREE with our Utah tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT tank license in 2025, practice as much as..

Train for FREE with our Utah tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT tank license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.

20
16
20

1 . Tread depth in the major grooves on a front tire should be at least:

3/4 of an inch. Tires need to have at least 4/32 of an inch of tread depth in every major groove on the front tires, and at least 2/32 of an inch of tread depth on other tires.

2 . When backing, using another person to help guide you is not recommended.

When backing, it is always a good idea to use a helper to monitor your blind spots.

3 . What can happen if one-fourth of the leaves in a leaf spring are missing when a vehicle is inspected?

The driver will be asked to decrease the weight of the load. If at least one-fourth of the leaves in a leaf spring are missing, the vehicle will be put out-of-service until the defect is fixed.

4 . Mismatched tire sizes are acceptable on the rear axles.

When inspecting a vehicle's tires, you should verify that there are no tires of mismatched sizes.

5 . A rear tire with a tread depth of 2/32 of an inch is acceptable.

Tires need to have at least 4/32 of an inch of tread depth in every major groove on the front tires, and at least 2/32 of an inch of tread depth on other tires.

6 . How many daily hours of sleep does an adult need to maintain alertness?

Four to five Being properly rested is essential to the safe operation of a CMV. To maintain alertness, most people need eight to nine hours of sleep per night.

7 . Tire rims that have welded repairs are acceptable for use.

Wheels or rims that have had welding repairs are not safe to be used.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet
99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2025 Utah | Frequently Asked Questions

A CDL Class B license in Utah permits drivers to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a towed vehicle not exceeding 10,000 pounds GVWR. This includes straight trucks, large buses, segmented buses, box trucks, and dump trucks with small trailers. The license requires passing a general knowledge test and a skills test.
A Class B CDL license in Utah allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a towed vehicle not exceeding 10,000 pounds GVWR. These vehicles include straight trucks, large buses, segmented buses, dump trucks with small trailers, and box trucks.
To acquire a Class B CDL license in Utah, applicants must be at least 18 years old (21 for interstate driving), possess a valid Utah driver's license, pass a vision test, and a written knowledge test. They must also complete a CDL application, provide medical certification, and successfully pass the Class B vehicle skills test.
In Utah, to qualify for a Class B Commercial Driver's License (CDL), you must be at least 18 years old. However, if you intend to drive across state lines or transport hazardous materials, federal regulations require you to be at least 21 years old.
While a Class B CDL license in Utah allows you to operate certain types of heavy vehicles, specific endorsements may be necessary based on the vehicle's features or cargo. For instance, a passenger endorsement is needed for vehicles carrying 16 or more passengers and a hazardous materials endorsement for transporting hazardous substances. Endorsements require additional written and skills tests.
The Class B CDL skills assessment in Utah consists of three sections: pre-trip vehicle inspection, basic vehicle control, and on-road driving. You'll be tested on your ability to inspect your vehicle before departure, control the vehicle under various conditions, and drive safely in regular traffic situations.
Yes, Class B CDL license holders in Utah are limited to operating vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 or more pounds. They can also tow vehicles that weigh less than 10,000 pounds. They aren't allowed to drive a Class A vehicle without the proper endorsements.
In Utah, the written Class B CDL test is primarily administered in English, in accordance with federal regulations. However, assistance may be available for individuals with limited English proficiency. It's advisable to contact the Utah Driver License Division directly to discuss possible accommodations or assistance.
Yes, you can request accommodations for the Class B CDL written exam in Utah if you have a disability. It's recommended to contact the Utah Driver License Division ahead of your testing date to discuss your needs and arrange appropriate accommodations. These may include extra time, a separate room, or a reader, depending on your specific needs.
If you don't pass the Class B CDL written test in Utah, you can retake it. However, you must wait until the next day to retake the test. There is no limit on the number of times you can retake the test, but a retest fee applies each time after the third attempt.

Search the best driving school in your neighbourhood