Class A Driving Test | Utah 2024 #1

Train for FREE online with our Utah class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

1 . The tire load:

Can be exceeded in cooler conditions.

Is the maximum safe weight a tire can carry at a given pressure.

Must be written in the shipping papers.

Tire load is the maximum weight a tire can safely carry at a given pressure. This rating is stated on the side of each tire.

2 . Convex mirrors:

Cannot be used on vehicles transporting hazardous materials.

Can replace flat mirrors.

Can be help a driver see a large area.

Are illegal in most states.

Convex mirrors are curved to provide drivers with wider views of the road than can be provided by flat mirrors. However, convex mirrors also make objects appear to be smaller and farther away than they really are.

3 . While driving downhill, you should brake until you reach a speed that is ____ below your safe speed, then release the brake pedal.

5 mph

10 mph

15 mph

20 mph

While driving downhill, you should hold down the brake pedal until your vehicle reaches a speed 5 mph below your safe speed, then release the brake pedal. Repeat this process.

4 . If equipped, a header board should:

Be damaged.

Be loose.

Be strong enough to contain cargo.

Light up when the engine is started.

When checking a header board during the vehicle inspection test, you should ensure that it is secure, free of damage, and strong enough to contain cargo.

5 . A broken exhaust system:

Can allow poisonous fumes into the cab.

Does not cause problems.

Should not cause concern.

Helps the vehicle run better.

A broken exhaust system is extremely hazardous because it can permit poisonous fumes to enter the vehicle's cab or sleeper berth.

6 . Which of the following is not an example of a driving hazard?

An accident on the roadway

An open road

A police car assisting a motorist on the side of the road

An ice cream truck

Passing an accident scene can be hazardous because the people involved in the accident may not be watching traffic, and the scene itself may distract other passing drivers. Ice cream trucks can create hazardous conditions because they attract children who may not pay attention to nearby vehicles. Shoppers near the roadway are often paying attention to stores, not passing traffic.

7 . An example of required emergency equipment is:

A spare electrical fuse.

A loud horn.

A battery-operated flashlight.

All commercial motor vehicles are required to be equipped with the proper emergency equipment. This may include spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and at least one properly charged and rated fire extinguisher.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Ace Your UT DMV Written Test Get Your UT DMV Cheat Sheet Now!

Your Progress

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

To Pass 50

4.46 out of 5 based on 67 votes

2024 Utah | Frequently Asked Questions

To secure a CDL Doubles/Triples endorsement in Utah, you first need a valid Commercial Driver's License (CDL). Next, study the Doubles and Triples section of the Utah CDL handbook. Then, schedule and pass the Doubles/Triples knowledge test at a Driver License Division office. After passing the test, you'll receive your endorsement. Remember, driving experience with these types of vehicles is beneficial.

To obtain a CDL Doubles/Triples license, you need a valid Commercial Driver's License (CDL). Study the Doubles and Triples section of your state's CDL handbook. Then, schedule and pass the Doubles/Triples knowledge test at your local driving license office. Upon passing, you will receive your endorsement. It's also recommended to have hands-on experience with these types of vehicles.

While it's not a legal requirement to have specialized experience or training for a CDL Doubles/Triples endorsement, it's highly recommended. This is because driving these types of vehicles requires specific skills. Studying the Doubles/Triples section of the CDL handbook and passing the knowledge test is mandatory, but practical experience can significantly improve safety and confidence.

Yes, to receive a CDL Doubles/Triples endorsement in Utah, you must pass an additional written knowledge test specifically for Doubles/Triples. This test covers the special procedures and safety considerations associated with operating these types of vehicles. It is separate from the general CDL written test. You can prepare by studying the Doubles/Triples section of your state's CDL handbook.

For the CDL Doubles/Triples endorsement, there isn't a specific skills or maneuvers test as there is with the basic CDL. The endorsement only requires a written knowledge test. However, the test will cover topics like coupling and uncoupling, inspecting doubles and triples, and managing the vehicles during different situations. These are skills you'll need to safely operate these vehicles.

No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Utah. The endorsement is required by federal and state law to ensure that drivers have the necessary skills and knowledge to safely operate these types of vehicles. Driving without the appropriate endorsement can result in fines and penalties.

You can append the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you'll need to pass the Doubles/Triples knowledge test. After passing, the endorsement will be added to your existing CDL. Remember, there's no skills test for this endorsement in Utah.

Yes, there are some limitations for drivers with a CDL Doubles/Triples endorsement. For instance, they can only drive vehicles that their base CDL allows. Additionally, all federal and state regulations regarding hours of service, vehicle maintenance, and safety inspections must be followed. Violating these rules can result in penalties or loss of the endorsement.

In Utah, double trailers can be up to 81 feet long and triple trailers up to 105 feet long. The maximum weight for both is 129,000 pounds. However, these limits can vary depending on the specific highways and routes used. Drivers should always check local regulations and restrictions before operating these types of vehicles.

Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include checking that all couplings are secure, maintaining extra following distance, and taking wider turns to avoid trailer off-tracking. Also, they must be aware of the "crack-the-whip" effect, which can cause a rollover. Federal regulations also apply, such as hours-of-service rules.