FREE CDL Tank Endorsement Test Online | North Dakota 2024 Page 2 of 3

Train for FREE with our North Dakota tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ND tank license in 2021, practice as much as.. Read More

Train for FREE with our North Dakota tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ND tank license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.

20
16
20
To Pass

8 . Which part of the truck is the air compressor connected to?

The door latch In an air brake system, the air compressor is connected to the engine through gears or a v-belt.

9 . Rollovers are most likely to happen when:

It is raining. Rollovers happen when an operator turns too fast. Drivers should be sure to slow down before entering turns and curves, especially when transporting a fully-loaded rig.

10 . To help control liquid surge, a driver should:

Brake well in advance of a stop. Drive vehicles with unbaffled tanks slowly and carefully, especially when stopping and starting. Brake well in advance of any stops and increase your following distance.

11 . Push in the trailer air supply control to:

Supply the trailer with air. Push in the trailer air supply control to supply the trailer with air. Pull out the trailer air supply control to turn off the air supply and activate the emergency brakes.

12 . If the spring brakes are activated, you should never:

Open the door to the cab. Never apply the brake pedal if your spring breaks are activated. Brakes can be damaged if they are subject to both springs and air pressure.

13 . Multi-speed axles and auxiliary transmissions are used:

To make a vehicle less noisy. On many vehicles, multi-speed rear axles and auxiliary transmissions are used to provide extra gears. They are usually controlled by a selector knob on the gearshift lever.

14 . When nearing a construction worker who is close to the road, you should:

Wait until the construction is complete before proceeding. When driving through work zones, you should make a particular point of reducing your speed when workers are on or near the road.

See the exact questions that will be on the 2024 DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Wait, before you go

Ace Your North dakota CDL Written Test with our Guaranteed Cheat Sheet

See the exact questions that will be on the 2024 North Dakota DMV exam.