During the on-road driving test, do not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in a railroad crossing.

Not change gears while your vehicle is on the tracks.

Pass another vehicle on the tracks if the other vehicle is going too slow.

Get out of the vehicle to check for a train.

Not change gears while your vehicle is on the tracks.

An Anti-Lock Braking System (ABS) intervenes to reduce brake pressure if there is a risk of wheel lockup. If the ABS isn't working, the vehicle's basic braking functions are not affected. A driver should continue to drive and brake in a normal manner.

The vehicle will still be able to brake.

The vehicle will have no brakes.

The vehicle will still be able to brake.

The vehicle will likely travel faster than usual.

If a heavy load prevents your vehicle from keeping up with the speed of other traffic, you should stay in the right lane.

Stay in the right lane whenever possible.

Switch gears while driving uphill.

Try to pass another vehicle while driving uphill.

Stay in the right lane whenever possible.

The low air pressure warning signal must activate before the air supply pressure drops below 55 psi in the air tank. If the warning signal does not turn on when being tested during an inspection, the vehicle is not safe to drive.

The warning light should activate.

The vehicle will be unable to shift out of gear.

If you are asked to alley dock, you should first pull past the alley and stop your vehicle in a position that is parallel to the outer boundary. From there, you should back your vehicle entirely into the alley parking area. Your vehicle should be parked in a straight position within the boundaries of the parking space.

Stop parallel to the outer boundary of the alley.

Position your vehicle directly in front of the alley.

Back up directly in front of the alley.

Stop parallel to the outer boundary of the alley.

A vehicle's weight is an important factor affecting its stopping distance. The heavier a vehicle is, the more work the brakes will need to do to bring it to a complete stop.

Is a major factor affecting stopping distance.

Usually has no impact on stopping distance.

Is a major factor affecting stopping distance.

Is not as important as the type of cargo in determining stopping distance.

Class B Driving Test | Hawaii 2024 #1

Train for FREE online with our Hawaii class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a HI CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

Class B Driving Test | Hawaii 2024 #1

1 . During the driving test, when encountering a railroad crossing, you should:

2 . If a vehicle's Anti-Lock Braking System (ABS) is malfunctioning:

3 . To ensure that you do not slow down traffic when driving a large truck, you should:

4 . If you are confronted with an aggressive driver, you should:

5 . What should happen before the air pressure in an air brake system tank falls below 55 psi?

6 . When alley docking, you should first:

7 . The weight of a truck:

Search the best driving school in your neighbourhood

Wait, before you go