Knowledge Test Class A #2
Class A Driving Test | Montana 2025 #2 Page 3 of 7
Train for FREE online with our Montana class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
15 . The steering wheel should be:
Cracked to allow for an improved grip.
To maintain proper control of your vehicle, the steering wheel should be held firmly with both hands. Your hands should be positioned on opposite sides of the wheel.
16 . If a load is 40 feet long, it should be secured by at least ____ tie-downs.
Cargo should be restrained by at least one tie-down for every 10 feet of cargo. However, all cargo should have at least two tie-downs, no matter the size of the cargo.
17 . Accelerating roughly is:
Discouraged, as it may confuse other drivers.
When accelerating, speed up smoothly and gradually so your vehicle does not jerk. Rough acceleration can cause mechanical damage.
18 . Which of the following is acceptable if found during a pre-trip inspection?
When inspecting your tires, verify that there is at least 4/32 of an inch of tread depth in every major groove on the front tires, and tread depth of at least 2/32 of an inch on the other tires. Tires on the same vehicle should all be the same size.
19 . A pre-trip inspection:
A pre-trip vehicle inspection should be done in the same way every time. Consistency will help a driver learn all of the proper steps and decrease the possibility of the driver forgetting to inspect something.
20 . Which of the following is not a crime that would disqualify an applicant from a hazardous materials endorsement?
Speeding
