Air Brakes #1
Air Brakes Endorsement Test | Minnesota 2025 #1 Page 3 of 4
Train for FREE online with our Minnesota CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MN Class A/Class B driver license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
13 . When braking with ABS, you should:
When operating a vehicle with an Anti-Lock Braking System (ABS), you should apply your brakes in the same manner as you would if operating a vehicle without ABS.
14 . Operating a combination vehicle usually requires ____ operating a single vehicle.
Exactly the same level of skill as
Combination vehicles require more skill to drive than single vehicles. Combination vehicles are usually longer and heavier, and are more vulnerable to rollovers.
15 . An alcohol evaporator removes alcohol from the air brake system.
Some air brake systems contain an alcohol evaporator. This device introduces alcohol into the braking system to inhibit the formation of ice.
16 . To help prevent rollovers, you should:
Keep the load on one side of the trailer.
To lower the risk of a rollover, load your cargo as closely to the ground as possible. To further reduce this risk, take curves and corners slowly.
17 . Making a quick lane change while pulling multiple trailers is usually safer than making a quick lane change while pulling only one trailer.
Double and triple combinations are less stable than single commercial vehicles. They are more likely to roll over when being driven with quick movements. Doubles and triples must be driven very smoothly and gently.
18 . Applying the brake pedal causes air pressure to activate an electric switch and:
Turn off the low pressure warning light.
In a vehicle with air brakes, the brake lights are activated when the brake pedal is pushed and air pressure moves an electric switch. With the application of air pressure, the switch will then turn on the brake lights.
2025 Minnesota | Frequently Asked Questions
To secure a CDL Bus endorsement in Minnesota, you must first hold a valid CDL. Next, you need to pass the passenger endorsement written test. After passing the test, you'll have to complete a skills test in the type of vehicle you'll be driving. Lastly, you must pass a background check if transporting school-aged children.
To obtain a CDL Bus license in Minnesota, you must have a valid driver's license and pass the CDL general knowledge test. Then, complete a training course specific to bus driving. After this, pass the passenger endorsement written test and a skills test in the type of bus you'll be driving. A successful background check is also required.
Yes, specific training is necessary for a CDL Bus endorsement in Minnesota. You need to complete a bus-specific training course and pass the passenger endorsement written test. Also, you'll have to pass a skills test in the actual type of bus you will be driving. The state recommends having some practical driving experience as well.
CDL Bus licenses in Minnesota fall under three classes: Class A, B, and C. Class A is for vehicles with a combined weight over 26,001 pounds where the towed vehicle is over 10,000 pounds. Class B is for vehicles over 26,001 pounds or vehicles transporting over 16 passengers. Class C is for vehicles designed to carry 16 or more passengers or hazardous materials not covered by A or B.
No, you cannot use your personal vehicle for the CDL Bus driving test in Minnesota. The vehicle you use for the test must match the type and class of bus you plan to drive after receiving your CDL. This is to ensure you can operate that specific type of bus safely and efficiently.
During the CDL Bus driving test in Minnesota, several skills are evaluated. These include pre-trip vehicle inspection, basic vehicle control, and on-road driving. You may be asked to execute specific maneuvers like turning, merging, backing up, and parking. Also, you'll be evaluated on interacting with traffic, using signals, maintaining safe speeds, and more.
Yes, to obtain a CDL Bus endorsement in Minnesota, you must pass a Department of Transportation (DOT) physical examination. This exam ensures that you are medically qualified to safely operate a commercial vehicle. It evaluates aspects like vision, hearing, blood pressure, and checks for conditions that might impair your driving ability.
No, it is not permissible to transport passengers without a valid CDL Bus endorsement in Minnesota. Operating a commercial bus without the appropriate license and endorsement is illegal and can result in severe penalties, including fines and possible jail time. Always ensure your license is valid before driving a commercial bus.
Yes, the CDL Bus endorsement can be added to your existing Commercial Driver's License (CDL) in Minnesota. You don't need to apply for a new license. However, you are required to pass the Passenger Endorsement Knowledge Test and a skills test in a vehicle representative of the class of bus you wish to drive.
Yes, there are some restrictions for drivers with a CDL Bus endorsement in Minnesota. They must not have more than one license, the vehicle they drive must not be loaded beyond its designated capacity and they must comply with federal regulations regarding hours of service, including rest periods and maximum driving times.