Air Brakes #1
Air Brakes Endorsement Test | Maine 2025 #1 Page 3 of 4
Train for FREE online with our Maine CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ME Class A/Class B driver license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
13 . In a dual air brake system, if one air system is very low on pressure:
In a dual air brake system, either the front or rear brakes will not be fully operable if one of the air systems gets too low on pressure. If the air pressure in either tank gets too low while you are driving, you should exit the road and park as soon as possible.
14 . During an applied leakage test, the maximum leakage rate for a double combination vehicle is ____ in a minute.
It is important to know the maximum air loss rate that is safe for your specific vehicle. A double combination vehicle should have a leakage rate no higher than 4 psi in a minute during an applied leakage test.
15 . To ensure normal stopping power, drivers of vehicles equipped with a front brake limiting valve should:
Some older vehicles have front brake limiting valves with "normal" and "slippery" settings. Setting a brake limiting valve to "slippery" reduces the vehicle's stopping power, so a driver should make sure the valve is in its "normal" position. Front wheel braking has proven to be effective in all driving conditions.
16 . During an applied leakage test, what is the maximum leakage rate that is safe for a single vehicle with air brakes?
It is important to know the maximum air loss rate that is safe for your specific vehicle. A single vehicle with air brakes should have a leakage rate no higher than 3 psi in a minute during an applied leakage test.
17 . What is often found in compressed air?
Compressed air in an air brake system usually contains a certain amount of water and compressor oil. The water and oil can damage the brakes if left to accumulate in the system. Tanks must be drained regularly to remove this build-up.
18 . ABS brakes:
The purpose of an Anti-Lock Braking System (ABS) is to prevent a vehicle's wheels from locking up when the driver brakes hard on a slippery surface.
2025 Maine | Frequently Asked Questions
To acquire a CDL Tank endorsement in Maine, you must already have a Commercial Driver's License (CDL). Next, study the Tank Vehicles section of the Maine CDL Handbook. Then, schedule and pass the Tank Vehicles Knowledge Test at your local Bureau of Motor Vehicles (BMV) branch. Upon passing, you'll receive your endorsement. Training courses are also available to help prepare for the test.
Obtaining a CDL Tank license requires having a Commercial Driver's License (CDL) first. You must study the Tank Vehicles section of your state's CDL handbook, then pass the Tank Vehicles Knowledge Test at your local Bureau of Motor Vehicles. Successful completion of this test will grant you the CDL Tank endorsement. Taking a training course is also beneficial.
While specific training or experience is not mandatory to get a CDL Tank endorsement in Maine, it's highly recommended. Studying the Tank Vehicles section of the Maine CDL Handbook is necessary. Passing the Tank Vehicles Knowledge Test at the local Bureau of Motor Vehicles is also required. Training courses, though not compulsory, can help prepare for this test.
Yes, to obtain a CDL Tank endorsement in Maine, you must pass the Tank Vehicles Knowledge Test. This is an additional written exam that covers specific knowledge related to operating tank vehicles. The information for this test can be found in the Tank Vehicles section of the Maine CDL Handbook.
The written test for a CDL Tank endorsement covers several subjects, including the inspection of tank vehicles, safe driving practices for tank vehicles, and safe loading and unloading procedures. It also includes questions about the handling of emergencies and the properties of different types of liquids and gases you might transport.
The CDL Tank endorsement assessment does not involve a skills or maneuvers test. Rather, it is a written test that examines your knowledge of operating tank vehicles. This includes understanding the vehicle's handling characteristics, the importance of inspecting tank vehicles, and the procedures to follow when loading and unloading cargo.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate tank vehicles, which are specifically designed to transport liquid or gaseous materials within a tank. Additionally, if the tank is not permanently attached to the vehicle, it must have a rated capacity of 1,000 gallons or more.
No, you cannot legally transport liquid or gas materials without a valid CDL Tank endorsement in the United States. This endorsement is required for drivers who wish to operate a tank vehicle, defined as a commercial vehicle designed to transport any liquid or gaseous materials within a tank either permanently or temporarily attached to the vehicle.
You can add a CDL Tank endorsement to your current commercial driver's license. You don't need to apply for a new license. However, you must pass the Tank Vehicle written test. After passing, the endorsement will be added to your existing CDL, enabling you to operate tank vehicles legally.
Yes, handling hazardous materials with a CDL Tank endorsement requires an additional Hazmat endorsement. To obtain this, you must pass a written test about the regulations and safety precautions for handling hazardous materials. Additionally, a TSA background check is required to ensure you're not a security risk.