FREE Air Brakes Endorsement Test Online | Kansas 2024 Page 2 of 4
Train for FREE online with our Kansas CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KS Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
7 . A tank endorsement is:
Optional when transporting hazardous materials.
In general, a tank endorsement is required to a drive tank vehicle used to transport liquids or gases. This applies to both hazardous and non-hazardous materials.
8 . Truck tractors with air brakes built on or after March 1, 1997 must have:
A rear back-up camera.
Truck tractors with air brakes built on or after March 1, 1997 must be equipped with Anti-Lock Braking Systems (ABS).
9 . Failing to drain the tanks in an air brake system can result in:
Too much fuel being carried.
In an air brake system, the air storage tanks must be drained to remove accumulated water and compressor oil. Failing to do this can cause damage. For example, water that has built up in the system could freeze in cold weather and cause brake failure.
10 . Some air brake systems use alcohol:
To reduce the risk of rust forming on air brake valves.
Some air brake systems contain an alcohol evaporator. This device introduces alcohol into the braking system to inhibit the formation of ice.
11 . Pressing and releasing a brake pedal unnecessarily can:
Create a loud noise.
In an air brake system, pressing and releasing the brake pedal unnecessarily can release air from the braking system faster than the compressor can replace it.
12 . If the spring brakes are activated, you should never:
Open the door to the cab.
Never apply the brake pedal if your spring breaks are activated. Brakes can be damaged if they are subject to both springs and air pressure.
2024 Kansas | Frequently Asked Questions
To acquire a CDL Tank endorsement in Kansas, you will need to pass the written knowledge test specific to tank vehicles. Study the Kansas CDL Manual and take practice tests to prepare. Once you feel confident, schedule an appointment at your local Kansas DMV office to take the test. If you pass, you will receive your CDL Tank endorsement.
To obtain a CDL Tank license in Kansas, you must already possess a valid Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Test which covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules. It's recommended to study the state's CDL manual before taking the test.
While Kansas does not specifically require training or experience to obtain a CDL Tank endorsement, it's highly recommended. The endorsement test covers specific knowledge about handling and driving tank vehicles. Studying the state's CDL manual, taking practice tests, and possibly enrolling in a training course can significantly increase your chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Kansas, you must pass the Tank Vehicle Endorsement Test. This written test covers specific knowledge about inspecting and driving tank vehicles, understanding the vehicle's structure, and following safe driving rules. It's recommended to thoroughly study the Kansas CDL manual before taking the test.
The written test for the CDL Tank endorsement in Kansas covers various subjects. These include knowledge of inspecting tank vehicles, understanding the vehicle's structure, recognizing high center of gravity and its effects, handling surge, and adhering to safe driving rules. The test also covers procedures for emergencies and loading/unloading of tanks.
The CDL Tank endorsement written test doesn't assess specific driving maneuvers. Instead, it evaluates knowledge on relevant topics such as the inspection of tank vehicles, understanding the high center of gravity, dealing with surge, handling unstable loads, and safe driving rules. Practical skills are usually assessed during the general CDL driving test or through on-the-job performance.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They must only drive tank vehicles consistent with their license class and endorsements. They must follow all specific safety protocols related to loading, unloading, and handling of tank vehicles. Additionally, they must comply with hours of service regulations and cannot transport hazardous materials unless they also have a Hazmat endorsement.
No, it's illegal to transport liquid or gas materials without a valid CDL Tank endorsement in Kansas. This endorsement is required for operating a tank vehicle, which is defined as any commercial vehicle designed to transport any liquid or gaseous materials within a tank of 1,000 gallons or more. Violations can result in fines and license suspension.
In Kansas, the CDL Tank endorsement can be added to your existing commercial driver's license. You don't need a fresh application for a new license. However, you must pass the Tank Vehicle written test. After passing the test, you pay a fee to add the endorsement to your current CDL. Always check with your local DMV for the most current procedures and fees.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional prerequisites. Drivers must also possess a Hazardous Materials (HazMat) endorsement. This requires passing a written test on federal and state regulations for transporting hazardous materials, and undergoing a federal security threat assessment, which includes fingerprinting and a background check.