Knowledge Test Class A #1

Class A Driving Test | Idaho 2026 #1 Page 7 of 7

Train for FREE online with our Idaho class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID CDL class A permit in 2026, practice as much as.. Read More

Train for FREE online with our Idaho class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

50
40
20
To Pass

43 . Which of the following is acceptable if found during a pre-trip inspection?

When inspecting your tires, verify that there is at least 4/32 of an inch of tread depth in every major groove on the front tires, and tread depth of at least 2/32 of an inch on the other tires. Tires on the same vehicle should all be the same size.

44 . When driving, knowing what is happening behind you is:

To travel safely, it is essential that you know what is happening on all sides of your vehicle at all times. Use your mirrors frequently to help you remain aware of your surroundings.

45 . To ensure normal stopping power, drivers of vehicles equipped with a front brake limiting valve should:

Some older vehicles have front brake limiting valves with "normal" and "slippery" settings. Setting a brake limiting valve to "slippery" reduces the vehicle's stopping power, so a driver should make sure the valve is in its "normal" position. Front wheel braking has proven to be effective in all driving conditions.

46 . Regrooved tires are:

Regrooved, recapped, or retreaded tires are not permitted to be used on the front of a bus.

47 . When stopping a manual transmission vehicle, you should:

When stopping, apply gradual pressure to the brake pedal and stop smoothly. If stopping a manual transmission vehicle, push the clutch in when the engine is close to idle.

48 . One way to avoid becoming an aggressive driver is to:

To help avoid frustration, which can lead to aggressive driving behavior, you should begin a trip with realistic expectations about your travel time. Plan ahead to allow time for potential traffic delays. Other strategies to help prevent aggressive driving behavior include driving an appropriate speed and keeping a reasonable following distance; avoiding making gestures at other drivers; and keeping your hands on the steering wheel.

49 . Driving at night is:

Driving at night is more dangerous than driving during the day because hazards become more difficult to see in the dark.

50 . If the low air pressure warning signal comes on in a vehicle with air brakes, the driver should:

If the low air pressure warning signal comes on while you are operating a vehicle with air brakes, you should stop and safely park the vehicle as soon as possible. It is essential that you are able to stop safely while you still have some braking power remaining.

See the exact questions that will be on the 2026 Idaho DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.

Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.

2026 Idaho | Frequently Asked Questions

A CDL Class B license in Idaho allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a towed vehicle not exceeding 10,000 pounds GVWR. This includes straight trucks, large buses, segmented buses, and dump trucks with small trailers. A special endorsement may be needed for certain vehicles.
A Class B CDL license in Idaho allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or tow a vehicle not exceeding 10,000 pounds GVWR. This includes straight trucks, large buses, segmented buses, farm labor vehicles, and dump trucks with small trailers. Special endorsements may be required for certain vehicles.
To acquire a Class B CDL license in Idaho, the applicant must be at least 18 years old for intrastate transport and 21 for interstate transport. They must pass a vision test, obtain a Medical Examiner's Certificate, pass a General Knowledge test, and a skills test which includes pre-trip inspection, basic controls, and on-road driving. Prior to testing, applicants need a Commercial Learner's Permit (CLP).
In Idaho, you must be at least 18 years old to qualify for a Class B CDL license for intrastate transport (within Idaho only). However, if you intend to drive interstate (across state lines), you must be at least 21 years old. These age requirements are set by the Federal Motor Carrier Safety Administration.
Specific endorsements aren't necessary for a Class B CDL license in Idaho, but they can broaden the range of vehicles you can operate and materials you can transport. These endorsements include passenger, school bus, tanker, hazardous materials (HazMat), and double/triple trailers. To get these endorsements, you must pass additional knowledge and skills tests.
The Class B CDL skills assessment in Idaho includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving test. You'll demonstrate your ability to inspect your vehicle, control its operation, and drive it safely in various road and traffic conditions. The specific maneuvers and operations you'll perform depend on the type of vehicle you're testing in.
Yes, Class B CDL license holders in Idaho are limited to operating vehicles with a gross vehicle weight rating (GVWR) of 26,001 lbs or more, or a vehicle towing another vehicle not exceeding 10,000 lbs GVWR. They cannot drive Class A vehicles (tractor-trailers) without the appropriate license. Also, without specific endorsements, they cannot transport hazardous materials or more than 15 passengers.
In Idaho, the written CDL test is primarily offered in English. However, some locations may offer the test in Spanish. It's important to note that all CDL applicants must pass an English proficiency test, as federal regulations require drivers to read and speak English to ensure road safety. Always check with your local DMV for available language options.
Yes, you can request test accommodations for the Class B CDL written exam in Idaho due to disability. The Idaho Transportation Department adheres to the Americans with Disabilities Act (ADA) and provides reasonable accommodations. However, you must provide documentation to verify your disability. Contact your local DMV office to discuss your specific needs and to ensure the right accommodations are made.
If you fail the Class B CDL written test in Idaho, you can retake it. However, you must wait at least three days before you can try again. Keep in mind that each attempt may require an additional fee. It's recommended to study thoroughly using the Idaho CDL manual and online practice tests to increase your chances of passing on the next attempt.

Wait, before you go

Ace Your Idaho CDL Written Test with our Guaranteed Cheat Sheet

See the exact questions that will be on the 2026 Idaho DMV exam.