Knowledge Test Class A #1
Class A Driving Test | Idaho 2024 #1 Page 5 of 7
Train for FREE online with our Idaho class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
29 . When driving on packed snow, you should reduce your speed by:
Reduce your speed when traveling on surfaces that provide reduced traction. Reduce your speed by one-half or more when traveling on packed snow.
30 . When approaching a vehicle for a pre-trip inspection, a driver should look under the vehicle:
When approaching your vehicle before an inspection, make note of its general condition and ensure that it is not damaged or leaning. Look under the vehicle for fresh leaks of oil, grease, or fuel. Check around the vehicle for hazards to movement, such as people, other vehicles, or low-hanging wires or tree limbs.
31 . To check the automatic transmission fluid level in some vehicles, you will have to:
In some vehicles, it may be necessary to leave the engine running when checking the automatic transmission fluid level.
32 . An Anti-Lock Braking System (ABS):
Beginning between 1997 and 1999, most commercial vehicles, trailers, and dollies are required to be equipped with ABS.
33 . Dry bulk tanks:
Dry bulk tanks require special care to be driven, both because they have high centers of gravity and because the weight of the load can shift in transit.
34 . When braking with ABS, you should:
When braking a vehicle equipped with an Anti-Lock Braking System (ABS), you should not brake any differently than you would if driving a vehicle with a different braking system.
35 . Emergency brakes:
All trucks, truck tractors, and buses must be equipped with emergency brakes and parking brakes.
Search the best driving school in your neighbourhood
2024 Idaho | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Idaho, you need to have a valid commercial driver's license (CDL). You will then need to pass the Doubles/Triples Knowledge Test offered by the Idaho Transportation Department. It's also recommended to practice with a qualified trainer before the test to ensure you understand how to safely operate these types of vehicles.
To obtain a CDL Doubles/Triples license, you must already hold a Commercial Driver's License (CDL). You'll need to pass the Doubles/Triples Knowledge Test, which covers coupling and uncoupling, inspecting doubles and triples, and checking air brakes. It's also recommended to have some hands-on training with a qualified instructor to ensure you can safely operate these vehicles.
While Idaho does not specifically require specialized experience or training for a CDL Doubles/Triples endorsement, it is highly recommended. Understanding how to handle these types of vehicles, how to couple and uncouple, and inspecting the vehicle are crucial. This knowledge can be gained through hands-on training with a qualified instructor and studying the CDL manual.
Yes, to obtain a CDL Doubles/Triples endorsement in Idaho, you are required to pass the Doubles/Triples Knowledge Test. This written exam focuses on the specific knowledge and skills needed to safely operate double and triple trailers, including coupling and uncoupling, vehicle inspections, and managing cargo.
During the CDL Doubles/Triples endorsement test in Idaho, you won't have to showcase specific driving skills or maneuvers. The test is knowledge-based and covers topics like coupling and uncoupling, inspecting doubles and triples, and managing cargo. However, practical skills like safely driving, turning, and parking these vehicles are crucial for real-world application.
No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Idaho. This endorsement is required by federal and state law to ensure that drivers have the necessary skills and knowledge to safely operate these larger, more complex vehicles. Operating without the endorsement can result in fines and penalties.
You can append the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples Knowledge Test. Once passed, the endorsement will be added to your existing CDL.
Drivers with a CDL Doubles/Triples endorsement must adhere to specific rules. These include restrictions on the maximum combined length of the trailers and the requirement to only drive these vehicles on designated highways. Also, they must follow all general CDL regulations, including hours of service rules, vehicle inspection requirements, and maintaining a clean driving record.
In Idaho, the maximum weight for a commercial vehicle, including double or triple trailers, is 105,500 lbs. The maximum length for a double trailer is 61 feet for the two trailers combined. Triple trailers are not generally permitted except on designated highways and they cannot exceed 95 feet in total length. These restrictions can change, so always check the current regulations.
Yes, there are specific safety guidelines for driving double/triple trailers. Drivers must maintain a safe following distance, anticipate stops, and avoid sudden lane changes. They should also be mindful of the "crack-the-whip" effect during turns. Regular vehicle inspections are mandatory to ensure brake system integrity and correct weight distribution. Additionally, drivers must comply with all CDL rules and federal regulations.
