Class A Driving Test | Delaware 2024 #2 Page 4 of 7
Train for FREE online with our Delaware class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a DE CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
22 . Roads are especially slippery right after it begins to rain because:
Roads are often especially slippery when it first begins to rain. Rainwater forms a slick film when mixed with oil and grease on the road surface that has not yet washed away.
23 . To check the automatic transmission fluid level in some vehicles, you will have to:
In some vehicles, it may be necessary to leave the engine running when checking the automatic transmission fluid level.
24 . In an emergency situation, you should:
Stopping is not always the safest option when responding to an emergency while driving. It is usually safer to steer out of the way when attempting to avoid a crash.
25 . Sometimes, when checking the automatic transmission fluid level:
In some vehicles, you may have to leave the engine running to check the automatic transmission fluid level.
26 . The ____ between an air compressor and reservoir tank prevents air from escaping if the air compressor has a leak.
A one-way check valve is required to be between an air compressor and the first main reservoir. This valve prevents air from escaping the system if the air compressor develops a leak.
27 . If you remain in neutral for too long while switching gears:
If you remain in neutral for too long while switching gears, you may have difficulty putting the vehicle into the next gear. If this happens, do not try to force the gear shift. Instead, return to neutral, release the clutch, increase the engine speed to match the road speed, and try again.
28 . How should you test the low pressure warning signal?
It is essential that your low pressure warning light functions properly. After allowing the system to charge, you can test the warning signal by rapidly applying and releasing the brake pedal. This will release air from the braking system and the warning signal should come on when pressure drops to a dangerous level.
See the exact questions that will be on the 2024 Delaware DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.