Knowledge Test Class A #2
Class A Driving Test | Alabama 2024 #2 Page 5 of 7
Train for FREE online with our Alabama class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
29 . When changing lanes, you should not:
Always signal and check your mirrors when turning and changing lanes.
30 . If you doubt that you have enough space to safely drive under a bridge or sign, you should:
If you are not certain that your vehicle will fit under overhead objects, you should slow down and take a different route, if possible.
31 . Which of the following is a good rule to follow when making a turn?
Signal early.
Signal well in advance of a turn so drivers behind you are aware of your intentions. Keep the signal on throughout the turn and turn it off once the turn is complete.
32 . Pressing and releasing a brake pedal unnecessarily can:
Create a loud noise.
In an air brake system, pressing and releasing the brake pedal unnecessarily can release air from the braking system faster than the compressor can replace it.
33 . The Individual Vehicle Distance Record (IVDR) does not need to include which of the following?
An Individual Vehicle Distance Record (IVDR) must include information about the distance traveled by a vehicle and the amount of fuel purchased. The required distance information includes the origin and destination points of the trip and the Vehicle Identification Number.
34 . A driver should always:
Drive faster than the posted speed limit.
While driving, you should continually scan the road to spot potential hazards in advance. Make emergency plans for how to deal with the hazards if they become dangerous.
35 . Having ABS on only one axle:
If you have an Anti-Lock Braking System (ABS) equipped on only the tractor, only the trailer, or only one axle, you will still have more control over the vehicle when braking than you would without ABS. You should brake normally.
Search the best driving school in your neighbourhood
2024 Alabama | Frequently Asked Questions
To acquire a CDL Tank endorsement in Alabama, you must first possess a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Knowledge test, which covers the proper handling and driving of tank vehicles. Studying the Alabama CDL Manual can assist in preparing for this test. After passing, you will receive the Tank endorsement on your CDL.
To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). You must then pass the Tank Vehicle Endorsement Knowledge test, which focuses on the correct handling and driving of tank vehicles. It's important to thoroughly study the Alabama CDL Manual to prepare for this test. Upon passing, you'll receive your CDL Tank endorsement.
While Alabama does not mandate specific training or experience for a CDL Tank endorsement, you must pass the Tank Vehicle Endorsement Knowledge test. This test covers the handling and driving of tank vehicles. Studying the Alabama CDL Manual can help prepare for this test. Practical experience or training could be beneficial, but it is not a legal requirement.
Yes, to obtain a CDL Tank endorsement in Alabama, you need to pass the Tank Vehicle Endorsement Knowledge test. This test is in addition to the general CDL test. It covers specific knowledge related to the safe operation and handling of tank vehicles. Studying the Alabama CDL Manual can help you prepare for this exam.
The written test for the CDL Tank endorsement in Alabama covers several topics related to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and safe handling of liquid cargo. It also includes understanding the high center of gravity in tank vehicles, checking for leaks, and emergency procedures. The Alabama CDL Manual provides detailed information on these subjects.
During the CDL Tank endorsement assessment, skills such as safe driving techniques, proper loading and unloading procedures, handling high center of gravity, and understanding outage requirements are evaluated. Additionally, applicants must demonstrate knowledge of emergency response procedures and understanding of how to inspect tank vehicles for safety issues.
Yes, drivers with a CDL Tank endorsement must follow specific rules. They must not drive a tank vehicle unless it's empty if they lack the endorsement. This also applies to tanks that were previously used to transport hazardous materials unless purged of any residue. Additionally, drivers must comply with all federal and state regulations regarding the transport of hazardous materials.
No, a valid Commercial Driver's License (CDL) with a Tank endorsement is required to transport liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. Driving such vehicles without the proper endorsement is against federal and state law in Alabama.
You can add the CDL Tank endorsement to your current commercial driver's license. It is not necessary to apply for a new license. However, you will need to pass the Tank Vehicle test, and there may be additional fees involved. Always check with your local DMV for specific requirements and procedures.
Yes, handling hazardous materials requires a Hazardous Materials (HazMat) endorsement in addition to the CDL Tank endorsement. To obtain a HazMat endorsement, you must pass a written test and a Transportation Security Administration background check. It's essential to understand and comply with these regulations for safety and legal reasons.
