Bus #2
Bus Driver Testing | Alabama 2025 #2
Train for FREE online with our AL bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Alabama in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
1 . A blind spot extends at least ____ behind a school bus.
1,000 feet
A school bus has blind spots immediately below the side flat mirrors, immediately in front of the side flat mirrors, and directly behind the rear bumper. Rear blind spots typically extend 50 to 150 feet behind a bus but can sometimes extend up to 400 feet, depending on the length of the vehicle.
2 . During the basic control skills test, you will receive points if you:
The examiner will score the number of times your vehicle touches or crosses an exercise boundary line. Each encroachment will count as an error, resulting in points against your skills test score.
3 . When taking the basic vehicle control skills test, failing to exit your vehicle properly during any exercise will result in:
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
4 . In the event of a bus evacuation, students should be led at least ____ away from the road.
100 feet
If it is necessary to evacuate a school bus, students should be led by the driver in the direction of oncoming traffic to a safe location that is at least 100 feet off the road. This will help to ensure that they are not hit by flying debris if another vehicle hits the bus.
5 . When stopping to pick up students, a bus driver should:
Place the vehicle in third gear.
When stopping to pick up students, a school bus should be put in park. If the transmission does not have a park shift point, the vehicle should instead be placed in neutral.
6 . ABS helps you:
The function of an Anti-Lock Braking System (ABS) is to prevent a vehicle's wheels from locking up when the driver brakes hard on a slippery surface.
7 . Properly adjusted outside convex mirrors should allow the driver to see:
The muffler.
On a school bus, outside convex mirrors should be adjusted to allow the driver to see at least one traffic lane on either side of the bus; the entire side of the bus up to the mirror mounts; and where the front of each rear tire touches the ground.
2025 Alabama | Frequently Asked Questions
To acquire a CDL Tank endorsement in Alabama, you must first possess a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Knowledge test, which covers the proper handling and driving of tank vehicles. Studying the Alabama CDL Manual can assist in preparing for this test. After passing, you will receive the Tank endorsement on your CDL.
To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). You must then pass the Tank Vehicle Endorsement Knowledge test, which focuses on the correct handling and driving of tank vehicles. It's important to thoroughly study the Alabama CDL Manual to prepare for this test. Upon passing, you'll receive your CDL Tank endorsement.
While Alabama does not mandate specific training or experience for a CDL Tank endorsement, you must pass the Tank Vehicle Endorsement Knowledge test. This test covers the handling and driving of tank vehicles. Studying the Alabama CDL Manual can help prepare for this test. Practical experience or training could be beneficial, but it is not a legal requirement.
Yes, to obtain a CDL Tank endorsement in Alabama, you need to pass the Tank Vehicle Endorsement Knowledge test. This test is in addition to the general CDL test. It covers specific knowledge related to the safe operation and handling of tank vehicles. Studying the Alabama CDL Manual can help you prepare for this exam.
The written test for the CDL Tank endorsement in Alabama covers several topics related to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and safe handling of liquid cargo. It also includes understanding the high center of gravity in tank vehicles, checking for leaks, and emergency procedures. The Alabama CDL Manual provides detailed information on these subjects.
During the CDL Tank endorsement assessment, skills such as safe driving techniques, proper loading and unloading procedures, handling high center of gravity, and understanding outage requirements are evaluated. Additionally, applicants must demonstrate knowledge of emergency response procedures and understanding of how to inspect tank vehicles for safety issues.
Yes, drivers with a CDL Tank endorsement must follow specific rules. They must not drive a tank vehicle unless it's empty if they lack the endorsement. This also applies to tanks that were previously used to transport hazardous materials unless purged of any residue. Additionally, drivers must comply with all federal and state regulations regarding the transport of hazardous materials.
No, a valid Commercial Driver's License (CDL) with a Tank endorsement is required to transport liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. Driving such vehicles without the proper endorsement is against federal and state law in Alabama.
You can add the CDL Tank endorsement to your current commercial driver's license. It is not necessary to apply for a new license. However, you will need to pass the Tank Vehicle test, and there may be additional fees involved. Always check with your local DMV for specific requirements and procedures.
Yes, handling hazardous materials requires a Hazardous Materials (HazMat) endorsement in addition to the CDL Tank endorsement. To obtain a HazMat endorsement, you must pass a written test and a Transportation Security Administration background check. It's essential to understand and comply with these regulations for safety and legal reasons.