Knowledge Test Class A #2
Class A Driving Test | Wisconsin 2026 #2 Page 2 of 7
Train for FREE online with our Wisconsin class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WI CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
8 . A CMV driver operating a passenger bus:
Drivers with a passenger endorsement are not exempt from federal medical standards.
9 . When doing an inspection, ensure that the brake pads are:
Free of oil or grease.
When inspecting a vehicle's brakes, you should make sure the shoes and pads do not have oil, grease, or brake fluid on them.
10 . When starting from a complete stop, a vehicle should:
To avoid hitting vehicles behind you, you must ensure that your vehicle will not roll backward when you start moving forward from a stopped position.
11 . When traction is poor, a driver should accelerate slowly:
To be the last vehicle through an intersection.
Speeding up too quickly on a road with poor traction could cause a driver to lose control of their vehicle. In conditions that cause poor traction, a driver should accelerate especially smoothly and gradually.
12 . With your low beam headlights turned on, you should be able to see about ____ ahead of your vehicle.
250 feet
Low beam headlights allow you to see about 250 feet ahead of your vehicle. When driving at night, adjust your speed so that you will be able to stop in the distance illuminated by your headlights.
13 . When checking the springs during a vehicle inspection, do all of the following, except:
Glue cracked leaf springs.
