Combination #1
Combination Vehicles Practice Test | Texas 2026 #1 Page 3 of 3
Train for FREE online with our Texas CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TX combination license in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
22
15 . Compared to other commercial motor vehicles, combination vehicles need more space on the road because they are longer and they:
Swerve more often.
Combination vehicles need more space on the road than other commercial vehicles because they are longer and need more space to turn and stop. It is especially important to properly manage space when you are operating a combination vehicle.
16 . In a double or triple combination:
The weight of the trailers does not matter.
When positioning trailers in a combination, the most heavily-loaded trailer should be the closest to the tractor. The lightest trailer should be positioned in the rear.
17 . After connecting the air lines to the trailer while coupling, you should:
Connect the electrical cord.
Correctly following the steps to couple and uncouple trailers is vital to safely operating a combination vehicle. After connecting the air lines to the trailer while coupling, you should supply air to the trailer.
18 . Starting in which year were newly manufactured trailers required to have ABS?
2004
All trailers and converter dollies manufactured on or after March 1, 1998 must be equipped with Anti-Lock Braking Systems (ABS).
19 . To prevent a rollover, a driver should:
Turn quickly.
Rollovers can happen when a combination vehicle is turned too quickly. To help prevent the risk of rollover, it is important to keep the vehicle's center of gravity low by loading cargo as close to the ground as possible.
20 . Push in the trailer air supply control to:
Supply the trailer with air.
Push in the trailer air supply control to supply the trailer with air. Pull out the trailer air supply control to turn off the air supply and activate the emergency brakes.
2026 Texas | Frequently Asked Questions
A CDL Class B license in Texas allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or any such vehicle towing another not exceeding 10,000 pounds. This includes buses, farm labor vehicles, and any combination of vehicles that are not Class A vehicles.
A Class B CDL license in Texas allows the holder to operate vehicles such as straight trucks, large buses, segmented buses, box trucks, dump trucks with small trailers, and tractor-trailers. However, it is important to note that any trailer being towed must not exceed a gross vehicle weight rating of 10,000 pounds.
To acquire a Class B CDL license in Texas, applicants must be at least 18 years old (21 for interstate driving), possess a valid Texas driver's license, pass a vision exam, and successfully complete a knowledge test. They must also pass a skills test, which includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving examination.
In Texas, you must be at least 18 years old to qualify for a Class B Commercial Driver's License (CDL) for intrastate driving (within Texas only). However, if you intend to drive across state lines (interstate driving), federal regulations require you to be at least 21 years old.
While not always necessary, specific endorsements can be added to a Class B CDL license in Texas to allow for the operation of special types of vehicles. These include passenger (P), school bus (S), and tanker (N) endorsements. Each endorsement requires additional knowledge tests, and some also require a skills test.
The Class B CDL skills assessment in Texas includes three parts: a pre-trip vehicle inspection to check your understanding of your vehicle and its operation, a basic controls test to assess your ability to control the vehicle, and a road test to evaluate your on-road driving skills in various traffic situations and environments.
Yes, there are limitations for Class B CDL license holders in Texas. They are permitted to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or tow a vehicle not exceeding 10,000 pounds GVWR. However, they cannot operate Class A vehicles unless they upgrade their license.
In Texas, the written Class B CDL test is primarily offered in English. However, Spanish versions are available. Please note that all CDL applicants must pass an English proficiency test, as federal regulations require all CDL holders to read and speak English sufficiently to communicate with the general public, understand highway traffic signs and signals, and respond to official inquiries.
Yes, the Texas Department of Public Safety (DPS) provides reasonable accommodations for individuals with disabilities during the Class B CDL written exam. You need to request these accommodations in advance. Contact your local DPS office for more information about the process and to discuss your specific needs.
Yes, if you don't pass the Class B CDL written test in Texas, you can retake it. However, you will need to wait at least one day before retesting. Keep in mind that additional fees may apply each time you retake the test. It's recommended to study thoroughly and use available practice tests to increase your chances of passing on the next attempt.