Air Brakes #2
Air Brakes Endorsement Test | South Dakota 2024 #2 Page 4 of 4
Train for FREE online with our South Dakota CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a SD Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
19 . The leakage rate for a triple combination vehicle with air brakes should be no more than ____ in one minute during a static leakage test.
When performing a static leakage test on a triple combination vehicle with air brakes, the leakage rate should be no more than 5 psi in one minute. If the air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
20 . Both systems in a dual air brake systems share:
An air compressor.
Both systems in a dual air brake system share a single air compressor. If the air compressor is damaged, neither system will be able to operate properly.
21 . When the spring brakes are on, you should never:
Never push down the brake pedal while the spring brakes are activated. The combined force of springs and air pressure could damage the brakes.
22 . How is the parking brake released?
By tapping the accelerator twice
In vehicles with air brakes, the parking brake is controlled by a knob. The knob is pulled out to apply the brakes, and pushed in to release them.
23 . Before starting down a hill, be sure to:
Switch into a low gear.
Before starting down a hill, be sure to switch into a low gear. Gravity will increase your vehicle's speed as you travel downhill.
24 . What kind of force must emergency brakes use?
Electrical
Because air pressure can eventually leak away, the emergency brakes in an air brake system must be held on by mechanical force.
25 . During an applied leakage test, the maximum leakage rate for a triple combination vehicle is:
4 psi in a minute.
It is important to know the maximum air loss rate that is safe for your specific vehicle. A triple combination should have a leakage rate no higher than 6 psi in a minute during an applied leakage test.
2024 South Dakota | Frequently Asked Questions
To acquire a CDL Tank endorsement in South Dakota, you must first have a Commercial Driver's License (CDL). Then, study the Tank Vehicle section of the South Dakota CDL Handbook. After you've mastered the material, schedule and pass the tank vehicle endorsement test at your local DMV. The test covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules.
To obtain a CDL Tank license, you must first have a Commercial Driver's License (CDL). You then need to study the Tank Vehicle section of your state's CDL manual. Once prepared, schedule and pass the Tank endorsement test at your local DMV. This test covers inspecting tank vehicles, driving tank vehicles, and safe driving rules.
While specific training or experience is not legally mandatory for a CDL Tank endorsement in South Dakota, it's highly recommended. You need to understand the specifics of operating tank vehicles, including inspecting and driving them safely. Studying the Tank Vehicle section of the South Dakota CDL Manual and passing the relevant DMV test are essential steps.
Yes, in order to receive a CDL Tank endorsement in South Dakota, you must pass an additional written test. This test focuses on the specifics of operating tank vehicles, such as safe driving rules and inspecting tank vehicles. It is separate from the general CDL written exam and requires additional study.
The written test for a CDL Tank endorsement in South Dakota covers several topics specific to tank vehicles. These include the inspection of tank vehicles, safe driving strategies, understanding the high center of gravity in tank vehicles, and managing surge. The test also covers procedures for emergencies, such as leaks or fires.
The CDL Tank endorsement doesn't usually involve a specific skills or maneuvers assessment. It primarily requires a written test. This exam covers topics such as inspecting tank vehicles, safe driving techniques, and understanding safety rules specific to tank vehicles. However, the general CDL test does assess practical skills and maneuvers for operating commercial vehicles.
Drivers with a CDL Tank endorsement in South Dakota must adhere to specific limitations and regulations. They are required to fully comprehend and follow safety procedures, including managing tank-specific issues like liquid surge. Additionally, they must comply with weight restrictions and hazardous materials regulations if applicable. Violations may result in endorsement suspension or revocation.
No, in South Dakota, it is illegal to transport liquid or gas materials without a valid CDL Tank endorsement. A CDL Tank endorsement is required for the transportation of any liquid or gas substance in a tank vehicle, as it ensures that the driver has the necessary skills and knowledge to handle such materials safely.
You can add a CDL Tank endorsement to your current commercial driver's license. It's not necessary to apply for a new license. However, you must pass the Tank endorsement written test. Once you pass the test, the endorsement will be added to your existing CDL. Remember, each state may have slightly different procedures, so check with your local DMV.
Yes, handling hazardous materials with a CDL Tank endorsement in South Dakota requires additional certifications. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. It's crucial to understand and comply with federal and state regulations to ensure safety when transporting hazardous materials.