Combination #1
Combination Vehicles Practice Test | Pennsylvania 2026 #1 Page 3 of 3
Train for FREE online with our Pennsylvania CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a PA combination license in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
15 . An air supply control lever should be in its "normal" position when you are:
Using your spring brakes.
Tractor protection controls in older vehicles may be operated by levers instead of knobs. If an air supply control is set in its "normal" position, it is properly set for you to pull a trailer.
16 . Failure to keep the fifth wheel plate properly greased could:
Affect the lights.
Failure to keep the fifth wheel plate properly lubricated can create friction between the tractor and trailer, causing steering problems.
17 . Pull out the trailer air supply control to test:
The landing gear.
Be sure to test the trailer emergency brakes before beginning a trip. After ensuring that the trailer rolls freely, you can test the emergency brakes by pulling out the trailer air supply control, or placing it in the "emergency" position. Pull forward slightly with the tractor and make sure the trailer does not move.
18 . When connecting a converter dolly to a second or third trailer, the trailer height should be:
Next to the center of the fifth wheel.
When connecting a converter dolly to a second or third trailer, the trailer height should be correct. It should be slightly lower than the center of the fifth wheel.
19 . Rollovers happen when:
ABS is working effectively.
Rollovers happen when a vehicle is driven too fast. To reduce the risk of rollover, make sure the weight of cargo is loaded low to the ground, and that you take turns and curves slowly.
20 . Avoid needing to make sudden lane changes by:
Pulling off the road and waiting when there is high traffic.
Making a sudden lane change can be dangerous when driving a combination vehicle. Avoid the need to make a sudden lane change by looking down the road for upcoming obstacles that will require you to change lanes.
Search the best driving school in your neighbourhood
2026 Pennsylvania | Frequently Asked Questions
To acquire a CDL Tank endorsement in Pennsylvania, you must first have a Commercial Driver's License (CDL). Then, study for the tank endorsement test using the Pennsylvania CDL handbook. Schedule and pass the test at a PennDOT Driver License Center. A passing score is 80% or higher. After passing, pay the required fee to add the endorsement to your CDL.
To obtain a CDL Tank license in Pennsylvania, you need to have a valid Commercial Driver’s License (CDL) first. Then, pass the Tank Vehicle (N) endorsement knowledge test that covers the specific knowledge required for safe operation of tank vehicles, including topics like handling high center of gravity and inspecting tank vehicles.
While Pennsylvania doesn't require specific training or experience for a CDL Tank endorsement, it's recommended to prepare for the knowledge test. This can be done through self-study or enrolling in a training program. Practical experience driving tank vehicles under supervision can also be beneficial. Remember, you must already hold a CDL to add this endorsement.
Yes, to obtain a CDL Tank endorsement in Pennsylvania, you must pass the Tank Vehicle (N) endorsement knowledge test. This written exam focuses on the specific knowledge needed for the safe operation of tank vehicles, including understanding the high center of gravity and how to inspect such vehicles.
The written test for the CDL Tank endorsement covers various subjects including inspecting tank vehicles, understanding the differences between baffled and unbaffled tanks, driving tank vehicles safely, and handling emergencies. It also includes understanding how liquid surge affects vehicle handling. The aim is to ensure drivers can safely handle large, often hazardous, liquid loads.
The CDL Tank endorsement does not typically involve a specific skills or maneuvers assessment. It primarily requires passing a written knowledge test. This test covers subjects like high center of gravity, safe operation, inspecting tank vehicles, and the effects of surge. However, overall CDL skills are assessed during the general CDL road test.
Yes, drivers with a CDL Tank endorsement must adhere to certain rules and regulations. For instance, they must follow all safety protocols for handling and transporting liquid materials. Also, if the tank is not baffled, the vehicle's movement can be affected due to liquid surge. Violation of these rules can lead to penalties or even loss of the CDL Tank endorsement.
No, it is illegal to transport liquid or gas materials in a tank vehicle without a valid CDL Tank endorsement in Pennsylvania. The endorsement ensures that the driver has the necessary knowledge and skills to handle such materials safely. Violating this rule can lead to serious penalties, including fines and loss of commercial driving privileges.
In Pennsylvania, you can add a CDL Tank endorsement to your current commercial driver's license. You do not need to apply for a new license. However, you will have to pass a knowledge test specific to tank vehicles and pay the required fees to add the endorsement to your existing CDL.
Yes, there are specific regulations and prerequisites in place for handling hazardous materials with a CDL Tank endorsement in Pennsylvania. These include passing a written test on hazardous materials, undergoing a background check, and completing a TSA threat assessment. Additionally, drivers must follow federal regulations regarding the transportation, labeling, and placarding of hazardous materials.
