Class B Driving Test | Oregon 2024 #1 Page 6 of 7
Train for FREE online with our Oregon class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OR CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
36 . Before driving a power steering-equipped vehicle, you should make sure that:
When inspecting a vehicle that is equipped with power steering, check the hoses, pumps, and fluid level. In particular, you should look for leaks in the hoses.
37 . The suspension system:
The suspension system holds up a vehicle and its load while keeping the axles in place. Faults in a vehicle's suspension system are extremely dangerous.
38 . During the vehicle inspection test, you must be able to do all of the following, except:
During the pre-trip vehicle inspection test, you will be asked to indicate where the dipstick is located. You will need to show that the oil level is within a safe operating range and above the refill mark.
39 . An applicant will be denied a hazardous materials endorsement if they:
Your application for a hazardous materials endorsement can be denied, or your existing endorsement canceled, if you do not have legal permanent status in the United States; you renounce U.S. citizenship; you are wanted for, under indictment for, or convicted of certain felonies; you are judged mentally incompetent or are involuntarily committed to a mental institution; or you are deemed by the Transportation Security Administration to pose a security threat.
40 . Most heavy vehicles require ____ to change gears.
Most heavy vehicles with manual transmissions require double clutching to change gears. A driver should release the accelerator, push in the clutch, and shift into neutral at the same time. After releasing the clutch and allowing the vehicle to change to the necessary speed, the driver should push in the clutch, shift gears, then simultaneously release the clutch and accelerate.
41 . When backing with a trailer, you should begin by:
When backing with a trailer, begin by turning the steering wheel in the direction opposite of the turn. Once the trailer starts to turn, reverse the direction of the steering wheel to follow the trailer.
42 . When approaching a curve during the on-road driving test, you must do all of the following, except:
When approaching a curve during the on-road driving test, you should thoroughly check traffic in all directions. Before entering the curve, reduce your speed sufficiently so that further braking or shifting is not required. Keep your vehicle in its lane and continue checking traffic in all directions.
See the exact questions that will be on the 2024 Oregon DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
